#ifndef __CONFIG_AM43XX_EVM_H
#define __CONFIG_AM43XX_EVM_H
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_CLK 48000000
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
/* I2C Configuration */
-#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
* we need to call board_early_init_f. This is taken care of in
* s_init when we have SPL used.
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE "mmc"
-#define FAT_ENV_DEVICE_AND_PART "0:1"
-#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
/* SPL USB Support */
#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
#endif
#undef CONFIG_USB_GADGET_DOWNLOAD
#undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_G_DNL_MANUFACTURER
-#undef CONFIG_G_DNL_VENDOR_NUM
-#undef CONFIG_G_DNL_PRODUCT_NUM
+#undef CONFIG_USB_GADGET_MANUFACTURER
+#undef CONFIG_USB_GADGET_VENDOR_NUM
+#undef CONFIG_USB_GADGET_PRODUCT_NUM
#undef CONFIG_USB_GADGET_DUALSPEED
#endif
* DM support in SPL
*/
#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
#undef CONFIG_TIMER
#endif
#ifndef CONFIG_SPL_BUILD
/* USB Device Firmware Update support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_RAM
-
-#define CONFIG_DFU_MMC
-#define DFU_ALT_INFO_MMC \
- "dfu_alt_info_mmc=" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "MLO fat 0 1;" \
- "spl-os-args fat 0 1;" \
- "spl-os-image fat 0 1;" \
- "u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1\0"
-
-#define DFU_ALT_INFO_EMMC \
- "dfu_alt_info_emmc=" \
- "MLO raw 0x100 0x100 mmcpart 0;" \
- "u-boot.img raw 0x300 0x1000 mmcpart 0\0"
-
-#define CONFIG_DFU_RAM
-#define DFU_ALT_INFO_RAM \
- "dfu_alt_info_ram=" \
- "kernel ram 0x80200000 0x4000000;" \
- "fdt ram 0x80f80000 0x80000;" \
- "ramdisk ram 0x81000000 0x4000000\0"
-
-#define CONFIG_DFU_SF
-#define DFU_ALT_INFO_QSPI \
- "dfu_alt_info_qspi=" \
- "u-boot.bin raw 0x0 0x080000;" \
- "u-boot.backup raw 0x080000 0x080000;" \
- "u-boot-spl-os raw 0x100000 0x010000;" \
- "u-boot-env raw 0x110000 0x010000;" \
- "u-boot-env.backup raw 0x120000 0x010000;" \
- "kernel raw 0x130000 0x800000\0"
-
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
DFU_ALT_INFO_EMMC \
DFU_ALT_INFO_RAM \
- DFU_ALT_INFO_QSPI
+ DFU_ALT_INFO_QSPI_XIP
#else
#define DFUARGS
#endif
#ifdef CONFIG_QSPI_BOOT
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
-#endif
-#undef CONFIG_ENV_IS_IN_FAT
-#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
#define CONFIG_ENV_OFFSET 0x110000
#define CONFIG_ENV_OFFSET_REDUND 0x120000
-#ifdef MTDIDS_DEFAULT
-#undef MTDIDS_DEFAULT
-#endif
-#ifdef MTDPARTS_DEFAULT
-#undef MTDPARTS_DEFAULT
-#endif
-#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \
- "512k(QSPI.u-boot.backup)," \
- "512k(QSPI.u-boot-spl-os)," \
- "64k(QSPI.u-boot-env)," \
- "64k(QSPI.u-boot-env.backup)," \
- "8m(QSPI.kernel)," \
- "-(QSPI.file-system)"
#endif
/* SPI */
-#undef CONFIG_OMAP3_SPI
#define CONFIG_TI_SPI_MMAP
#define CONFIG_QSPI_SEL_GPIO 48
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_QSPI_QUAD_SUPPORT
#define CONFIG_TI_EDMA3
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
#ifndef CONFIG_SPL_BUILD
+#include <environment/ti/dfu.h>
+#include <environment/ti/mmc.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "setenv devnum ${mmcdev}; " \
- "setenv devtype mmc; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${devnum};" \
- "if run loadimage; then " \
- "run loadfdt; " \
- "echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;" \
- "fi;\0" \
"usbboot=" \
"setenv devnum ${usbdev}; " \
"setenv devtype usb; " \
DFUARGS \
#define CONFIG_BOOTCOMMAND \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run envboot;" \
"run mmcboot;" \
/* CPSW Ethernet */
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_PHY_GIGE
#endif
#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_PHYLIB
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT)
-#undef CONFIG_ENV_IS_IN_FAT
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
#define CONFIG_SYS_RX_ETH_BUFFER 64
/* NAND support */
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 26
-#define MTDIDS_DEFAULT "nand0=nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
- "256k(NAND.SPL)," \
- "256k(NAND.SPL.backup1)," \
- "256k(NAND.SPL.backup2)," \
- "256k(NAND.SPL.backup3)," \
- "512k(NAND.u-boot-spl-os)," \
- "1m(NAND.u-boot)," \
- "256k(NAND.u-boot-env)," \
- "256k(NAND.u-boot-env.backup1)," \
- "7m(NAND.kernel)," \
- "-(NAND.file-system)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000
/* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
#define NANDBOOT
#endif /* CONFIG_NAND */
+#if defined(CONFIG_TI_SECURE_DEVICE)
+/* Avoid relocating onto firewalled area at end of DRAM */
+#define CONFIG_PRAM (64 * 1024)
+#endif /* CONFIG_TI_SECURE_DEVICE */
+
#endif /* __CONFIG_AM43XX_EVM_H */
projects / people / ms / u-boot.git / blobdiff