configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / aristainetos-common.h

diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index d44624d68b04e4c9b6a0da1b31da1ee3d50ffcd2..b6edfe094806992ed623fe5c74b7cdd4bd5ce619 100644 (file)
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -17,25 +17,15 @@
 
 #define CONFIG_MACH_TYPE       4501
 #define CONFIG_MMCROOT         "/dev/mmcblk0p1"
-#define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (64 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -45,20 +35,12 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MTD
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          3
 #define CONFIG_SF_DEFAULT_SPEED                20000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
 
-/* Command definition */
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=u-boot.scr\0" \
        "fit_file=/boot/system.itb\0" \
@@ -70,7 +52,7 @@
        "rescue_sys_length=f10000\0" \
        "panel=lb07wv8\0" \
        "splashpos=m,m\0" \
-       "console=" CONFIG_CONSOLE_DEV "\0" \
+       "console=" CONSOLE_DEV "\0" \
        "fdt_high=0xffffffff\0"   \
        "initrd_high=0xffffffff\0" \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
@@ -112,9 +94,6 @@
        "ubiboot=echo Booting from ubi ...; " \
                "run ubiargs addmtd addmisc set_fit_default;" \
                "bootm ${fit_addr_r}\0" \
-       "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
-               "ubifsload ${fit_addr_r} /boot/system.itb; " \
-               "imi ${fit_addr_r}\0 " \
        "rescueargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/ram rw\0 " \
        "rescueboot=echo Booting rescue system from NOR ...; " \
@@ -166,8 +145,6 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x100000)
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
-#define CONFIG_STACKSIZE               (128 * 1024)
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -193,14 +170,13 @@
 #define CONFIG_ENV_OFFSET              (0x0d0000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x0e0000)
 
-#define CONFIG_CMD_CACHE
-
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           0x7f
@@ -224,43 +200,23 @@
 #define CONFIG_SYS_I2C_RTC_ADDR        0x68
 #define CONFIG_SYS_RTC_BUS_NUM 2
 #define CONFIG_RTC_M41T11
-#define CONFIG_CMD_DATE
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
 /* UBI support */
-#define CONFIG_LZO
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-
-#define CONFIG_MTD_UBI_FASTMAP
-#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT     1
 
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG
 
-#define CONFIG_FIT
-
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 /* check this console not needed, after test remove it */
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -270,8 +226,6 @@
 #define CONFIG_IPUV3_CLK 198000000
 #define CONFIG_IMX_VIDEO_SKIP
 
-#define CONFIG_CMD_BMP
-
 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK        66000000