configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / astro_mcf5373l.h

diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index ed9400e4c0bd3c69a26375198528b837fb39498c..05d41cef5df3954508756598e8924eaedf1c106f 100644 (file)
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -3,7 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -39,21 +39,9 @@
 #error No card type defined!
 #endif
 
-/*
- * Define processor
- * possible values for Urmel board: only Coldfire M5373 processor supported
- * (please do not change)
- */
-
-/* it seems not clear yet which processor defines we should use */
-#define CONFIG_MCF537x                 /* define processor family */
-#define CONFIG_MCF532x                 /* define processor family */
-#define CONFIG_M5373                   /* define processor type */
 #define CONFIG_ASTRO5373L              /* define board type */
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-
 /*
  * CONFIG_RAM defines if u-boot is loaded via BDM (or started from
  * a different bootloader that has already performed RAM setup) or
@@ -69,28 +57,18 @@
 #define ENABLE_JFFS    1
 #endif
 
-/* Define which commmands should be available at u-boot command prompt */
+/* Define which commands should be available at u-boot command prompt */
 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_XIMG
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 #if ENABLE_JFFS
 #define CONFIG_CMD_JFFS2
 #endif
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
@@ -110,10 +88,8 @@
 /*
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  */
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 80000000
 #define CONFIG_SYS_CPU_CLK             (CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE          32              /* SDRAM size in MB */
@@ -229,8 +205,6 @@
 #define CONFIG_BOOTARGS                " console=ttyS2,115200 rootfstype=romfs"\
                                " loaderversion=$loaderversion"
 
-#define CONFIG_SYS_PROMPT      "URMEL > "
-
 /* default RAM address for user programs */
 #define CONFIG_SYS_LOAD_ADDR   0x20000
 
@@ -354,6 +328,10 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      1
 #define CONFIG_SYS_FLASH_CFI_NONBLOCK  1
 
+#define LDS_BOARD_TEXT \
+       . = DEFINED(env_offset) ? env_offset : .; \
+       common/env_embedded.o       (.text*)
+
 #if ENABLE_JFFS
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK    0