]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/at91-sama5_common.h
Convert CONFIG_BOOTCOUNT_ENV to Kconfig
[people/ms/u-boot.git] / include / configs / at91-sama5_common.h
index a5990cec0300d33b1392b97a26e9d4407fed5232..8e1334284a456149065a4bc15ff0ca7c1eadbf8c 100644 (file)
 #ifndef __AT91_SAMA5_COMMON_H
 #define __AT91_SAMA5_COMMON_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE           0x26f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT               /* Device Tree support */
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* general purpose I/O */
+#ifndef CONFIG_DM_GPIO
 #define CONFIG_AT91_GPIO
+#endif
 
-#define CONFIG_BOOTDELAY               3
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 #ifdef CONFIG_ENV_IS_IN_MMC
 /* Use raw reserved sectors to save environment */
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #else
 /* u-boot env in sd/mmc card */
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define FAT_ENV_INTERFACE      "mmc"
-#define FAT_ENV_DEVICE_AND_PART        "0"
-#define FAT_ENV_FILE           "uboot.env"
 #define CONFIG_ENV_SIZE                0x4000
 #endif
 
                                "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
                                "fatload mmc 0:1 0x22000000 zImage; "   \
                                "bootz 0x22000000 - 0x21000000"
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "root=/dev/mmcblk0p2 rw rootwait"
+
 #else
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
-       "256K(env),256k(env_redundent),256k(spare),"                    \
-       "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
-       "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
-
-#ifdef CONFIG_SYS_USE_NANDFLASH
+
+#ifdef CONFIG_NAND_BOOT
 /* u-boot env in nand flash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0xc0000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                        0x20000
 #define CONFIG_BOOTCOMMAND             "nand read 0x21000000 0x180000 0x80000;"        \
                                        "nand read 0x22000000 0x200000 0x600000;"       \
                                        "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SYS_USE_SERIALFLASH
+#elif CONFIG_SPI_BOOT
 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET              0x4000
-#define CONFIG_ENV_SIZE                        0x4000
+#define CONFIG_ENV_OFFSET              0x6000
+#define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_SECT_SIZE           0x1000
 #define CONFIG_BOOTCOMMAND             "sf probe 0; "                          \
                                        "sf read 0x21000000 0x60000 0xc000; "   \
 
 #endif
 
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)