Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / at91sam9m10g45ek.h

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 341b21df270c305a767fb2a0aad78c6696b96d9f..a1e71e6cea192ac086b9b36f92b8424c4ae5c377 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -30,11 +30,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -64,7 +59,6 @@
 #define        CONFIG_RED_LED          AT91_PIN_PD31   /* this is the user1 led */
 #define        CONFIG_GREEN_LED        AT91_PIN_PD0    /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -80,18 +74,7 @@
 
 /* No NOR flash */
 #define CONFIG_SYS_NO_FLASH
-
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -117,7 +100,6 @@
 #endif
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
@@ -126,7 +108,6 @@
 #endif
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -141,7 +122,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
 
@@ -167,8 +147,12 @@
 #elif CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env + linux in mmc */
 #define FAT_ENV_INTERFACE      "mmc"
-#define FAT_ENV_DEVICE         0
-#define FAT_ENV_PART           1
+/*
+ * We don't specify the part number, if device 0 has partition table, it means
+ * the first partition; it no partition table, then take whole device as a
+ * FAT file system.
+ */
+#define FAT_ENV_DEVICE_AND_PART        "0"
 #define FAT_ENV_FILE           "uboot.env"
 #define CONFIG_ENV_IS_IN_FAT
 #define CONFIG_FAT_WRITE
@@ -185,18 +169,69 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x300000
+#define CONFIG_SPL_MAX_SIZE            0x010000
+#define CONFIG_SPL_STACK               0x310000
+
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SYS_MONITOR_LEN         0x80000
+
+#ifdef CONFIG_SYS_USE_MMC
+
+#define CONFIG_SPL_BSS_START_ADDR      0x70000000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x00080000
+#define CONFIG_SYS_SPL_MALLOC_START    0x70080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00080000
+
+#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
+#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE                256
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+#endif
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define CONFIG_SYS_AT91_PLLA           0x20c73f03
+#define CONFIG_SYS_MCKR                        0x1301
+#define CONFIG_SYS_MCKR_CSS            0x1302
+
 #endif