configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / at91sam9n12ek.h

diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index c3d07a151e04f23bf56a5a8f15fb595e9da763e7..5b3a4591fda617073ce2ac76e5cb73f23907c37a 100644 (file)
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -27,30 +27,15 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define CONFIG_USART_ID                        ATMEL_ID_SYS
-#define CONFIG_BAUDRATE                        115200
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP                                LCD_COLOR16
 #define LCD_OUTPUT_BPP                 24
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 
 /*
  * BOOTP options
@@ -60,9 +45,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * Command line configuration.
  */
@@ -78,14 +60,11 @@
  * that address while providing maximum stack area below.
  */
 # define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+       (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_SF_DEFAULT_SPEED                30000000
-#define CONFIG_ENV_SPI_MODE            SPI_MODE_3
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
 #endif
 
 /* NAND flash */
@@ -111,7 +90,6 @@
 
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT                 "nand0=atmel_nand"
 #define MTDPARTS_DEFAULT                                               \
        "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
@@ -124,18 +102,6 @@
        "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
        "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
 
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_KS8851_MLL
 #define CONFIG_KS8851_MLL_BASEADDR     0x30000000 /* use NCS2 */
@@ -172,7 +138,7 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET              0x120000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                        0x20000         /* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND                                             \
@@ -193,7 +159,6 @@
 #else
 /* Use file in FAT file to save environment */
 #define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
 #define FAT_ENV_INTERFACE              "mmc"
 #define FAT_ENV_FILE                   "uboot.env"
 #define FAT_ENV_DEVICE_AND_PART                "0"
@@ -230,7 +195,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
 #define CONFIG_SYS_MASTER_CLOCK                132096000
@@ -240,8 +204,6 @@
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"