Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index b9a77547b6c3d1329b58d43e42b05d9d001335d9..bb0e120999dc9dff3f8e8574d18a77ba72456e3d 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -26,11 +26,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -52,7 +47,6 @@
 #define CONFIG_ATMEL_LCD_RGB565
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -68,20 +62,13 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 /*
  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
  */
 
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
@@ -93,7 +80,6 @@
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #endif
 
@@ -159,7 +145,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9x5"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     3
 #endif
-#define CONFIG_USB_STORAGE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
@@ -223,15 +208,11 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#define CONFIG_SYS_PROMPT      "U-Boot> "
 #define CONFIG_SYS_CBSIZE      256
 #define CONFIG_SYS_MAXARGS     16
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
-                                       + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -249,9 +230,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_INIT
@@ -262,8 +240,6 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#define ATMEL_BASE_MPDDRC              ATMEL_BASE_DDRSDRC
-
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
@@ -271,8 +247,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_SPL_NAND_SUPPORT