Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / axs101.h

diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index 6e8c56c1dde694cc5532428a8ea751c08b36f80c..006ddb3a7327c84f999217497b0efb9f6cbb0728 100644 (file)
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -10,23 +10,8 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER             3
-#define CONFIG_SYS_CACHELINE_SIZE      32
-#define CONFIG_SYS_CLK_FREQ            750000000
 #define CONFIG_SYS_TIMER_RATE          CONFIG_SYS_CLK_FREQ
 
-/* NAND controller DMA doesn't work correctly with D$ enabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is in RAM already */
-
-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define ARC_FPGA_PERIPHERAL_BASE       0xE0000000
 #define ARC_APB_PERIPHERAL_BASE                0xF0000000
 #define ARC_DWMMC_BASE                 (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
@@ -35,7 +20,6 @@
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE           0x81000000
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
@@ -49,6 +33,12 @@
 #define CONFIG_SYS_BOOTM_LEN           0x2000000       /* 32 MB */
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
 
+/*
+ * This board might be of different versions so handle it
+ */
+#define CONFIG_BOARD_TYPES
+#define CONFIG_BOARD_EARLY_INIT_F
+
 /*
  * NAND Flash configuration
  */
@@ -58,28 +48,13 @@
 
 /*
  * UART configuration
- *
- * CONFIG_CONS_INDEX = 1 - Debug UART
- * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB
  */
-#define CONFIG_CONS_INDEX              4
-#define CONFIG_SYS_NS16550
+#define CONFIG_DW_SERIAL
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    -4
-#if (CONFIG_CONS_INDEX == 1)
-       /* Debug UART */
-#      define CONFIG_SYS_NS16550_CLK           33333000
-#else
-       /* FPGA UARTs use different clock */
-#      define CONFIG_SYS_NS16550_CLK           33333333
-#endif
-#define CONFIG_SYS_NS16550_COM1                (ARC_APB_PERIPHERAL_BASE + 0x5000)
-#define CONFIG_SYS_NS16550_COM2                (ARC_FPGA_PERIPHERAL_BASE + 0x20000)
-#define CONFIG_SYS_NS16550_COM3                (ARC_FPGA_PERIPHERAL_BASE + 0x21000)
-#define CONFIG_SYS_NS16550_COM4                (ARC_FPGA_PERIPHERAL_BASE + 0x22000)
+#define CONFIG_SYS_NS16550_CLK         33333333
 #define CONFIG_SYS_NS16550_MEM32
-
 #define CONFIG_BAUDRATE                        115200
+
 /*
  * I2C configuration
  */
@@ -101,7 +76,6 @@
 /*
  * EEPROM configuration
  */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR             (0xA8 >> 1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW    1
@@ -119,33 +93,21 @@
 /*
  * Ethernet PHY configuration
  */
-#define CONFIG_PHYLIB
 #define CONFIG_MII
 #define CONFIG_PHY_GIGE
 
 /*
- * Ethernet configuration
+ * USB 1.1 configuration
  */
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_DW_AUTONEG
-#define CONFIG_NET_MULTI
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 
 /*
- * Command line configuration
+ * Commands still not supported in Kconfig
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RARP
-
-#define CONFIG_OF_LIBFDT
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             16
@@ -169,7 +131,6 @@
  * Console configuration
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT              "AXS# "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \