config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[people/ms/u-boot.git] / include / configs / baltos.h

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index b8c915c7205861c293d13421acde82652108f98d..4e07e52a1b2a5fb8afafbc50b5291725c4f5939c 100644 (file)
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -21,7 +21,6 @@
 
 #define MACH_TYPE_TIAM335EVM           3589    /* Until the next sync */
 #define CONFIG_MACH_TYPE               MACH_TYPE_TIAM335EVM
-#define CONFIG_BOARD_LATE_INIT
 
 /* Clock Defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
@@ -48,14 +47,12 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
 #define CONFIG_LZO
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
 /* I2C configuration */
 #undef CONFIG_SYS_OMAP24_I2C_SPEED
 #define CONFIG_SYS_OMAP24_I2C_SPEED 1000
 
-#undef CONFIG_SPL_OS_BOOT
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x00080000
 #ifdef CONFIG_SPL_OS_BOOT
@@ -104,7 +101,9 @@
        "optargs=\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 ro\0" \
+       "usbroot=/dev/sda2 ro\0" \
        "mmcrootfstype=ext4 rootwait\0" \
+       "usbrootfstype=ext4 rootwait\0" \
        "rootpath=/export/rootfs\0" \
        "nfsopts=nolock\0" \
        "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
@@ -116,6 +115,11 @@
                "${mtdparts} " \
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
+       "usbargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "${mtdparts} " \
+               "root=${usbroot} " \
+               "rootfstype=${usbrootfstype}\0" \
        "spiroot=/dev/mtdblock4 rw\0" \
        "spirootfstype=jffs2\0" \
        "spisrcaddr=0xe0000\0" \
@@ -132,15 +136,25 @@
                "ip=dhcp\0" \
        "bootenv=uEnv.txt\0" \
        "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+       "usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
        "importbootenv=echo Importing environment from mmc ...; " \
                "env import -t $loadaddr $filesize\0" \
+       "usbimportbootenv=echo Importing environment from USB ...; " \
+               "env import -t $loadaddr $filesize\0" \
        "ramargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "root=${ramroot} " \
                "rootfstype=${ramrootfstype}\0" \
        "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
        "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+       "usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
        "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+       "usbloados=run usbargs; " \
+               "bootm ${loadaddr}#conf${board_name}; " \
+               "if test $? -ne 0; then " \
+                       "echo Using default FIT configuration; " \
+                       "bootm ${loadaddr}; " \
+               "fi;\0" \
        "mmcloados=run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -155,6 +169,21 @@
                "else " \
                        "bootz; " \
                "fi;\0" \
+       "usbboot=usb reset; " \
+               "if usb storage; then " \
+                       "echo USB drive found;" \
+                       "if run usbloadbootenv; then " \
+                               "echo Loaded environment from ${bootenv};" \
+                               "run usbimportbootenv;" \
+                       "fi;" \
+                       "if test -n $uenvcmd; then " \
+                               "echo Running uenvcmd ...;" \
+                               "run uenvcmd;" \
+                       "fi;" \
+                       "if run usbloadimage; then " \
+                               "run usbloados;" \
+                       "fi;" \
+               "fi;\0" \
        "mmcboot=mmc dev ${mmcdev}; " \
                "if mmc rescan; then " \
                        "echo SD/MMC found on device ${mmcdev};" \
@@ -192,13 +221,13 @@
 
 #define CONFIG_BOOTCOMMAND \
        "run findfdt; " \
+       "run usbboot;" \
        "run mmcboot;" \
        "setenv mmcdev 1; " \
        "setenv bootpart 1:2; " \
        "run mmcboot;" \
        "run nandboot;"
 
-
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* Base EVM has UART0 */
 #define CONFIG_SYS_NS16550_COM2                0x48022000      /* UART1 */
@@ -218,22 +247,16 @@
 
 /* SPL */
 #ifndef CONFIG_NOR_BOOT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_YMODEM_SUPPORT
-
 /* Bootcount using the RTC block */
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_AM33XX
 
 /* USB gadget RNDIS */
-/*#define CONFIG_SPL_MUSB_NEW_SUPPORT*/
 
 /* General network SPL, both CPSW and USB gadget RNDIS */
-/*#define CONFIG_SPL_NET_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_NET_VCI_STRING      "AM335x U-Boot SPL"*/
 
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/am33xx/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
 
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
@@ -271,45 +294,27 @@
  */
 #define CONFIG_USB_MUSB_DSPS
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE        MUSB_HOST
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif
-
 #ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_HOST_ADDR        "de:ad:be:af:00:00"
-
-/* USB TI's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
-#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #endif /* CONFIG_USB_MUSB_GADGET */
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* disable host part of MUSB in SPL */
-#undef CONFIG_USB_MUSB_HOST
 /* disable EFI partitions and partition UUID support */
 #undef CONFIG_PARTITION_UUIDS
 #undef CONFIG_EFI_PARTITION
 /*
  * Disable CPSW SPL support so we fit within the 101KiB limit.
  */
-#undef CONFIG_SPL_ETH_SUPPORT
 #endif
 
 /* Network. */
@@ -318,7 +323,6 @@
 #define CONFIG_PHY_ADDR                        0
 #define CONFIG_PHY_SMSC
 #define CONFIG_MII
-#define CONFIG_CMD_MII
 #define CONFIG_PHY_ATHEROS
 
 /* NAND support */