]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/bcm23550_w1d.h
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
[people/ms/u-boot.git] / include / configs / bcm23550_w1d.h
index bd3c7116d5348562510ec1b540ca95c748c09f2f..9c23c9b56f823139e566141bf17a9f37e267405e 100644 (file)
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE           0x9f000000
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 #define CONFIG_NR_DRAM_BANKS           1
 
 #define CONFIG_SYS_MALLOC_LEN          SZ_4M   /* see armv7/start.S. */
-#define CONFIG_STACKSIZE               SZ_256K
 
 /* GPIO Driver */
 #define CONFIG_KONA_GPIO
 
 /* MMC/SD Driver */
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDMA
-#define CONFIG_KONA_SDHCI
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_COM1                0x3e000000
 
-#define CONFIG_BAUDRATE                        115200
-
 /* must fit into GPT:u-boot-env partition */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_OFFSET              (0x00011a00 * 512)
 #define CONFIG_ENV_SIZE                        (8 * 512)
 
-#define CONFIG_SYS_NO_FLASH    /* Not using NAND/NOR unmanaged flash */
-
 /* console configuration */
 #define CONFIG_SYS_CBSIZE              1024    /* Console buffer size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                       sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
 #define CONFIG_SYS_MAXARGS             64
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
  * This is necessary for the fatls command to work on an SD card
  * for example.
  */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 
 /* version string, parser, etc */
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /* Initial upstream - boot to cmd prompt only */
 #define CONFIG_BOOTCOMMAND             ""
 
-/* Commands */
-#define CONFIG_FAT_WRITE
-
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV  0
-#define CONFIG_SYS_CACHELINE_SIZE      64
-#define CONFIG_FASTBOOT_BUF_SIZE       0x1d000000
-#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_SDRAM_BASE
-#undef CONFIG_USB_GADGET_VBUS_DRAW
-#define CONFIG_USB_GADGET_VBUS_DRAW    0
-#define CONFIG_USB_GADGET_DWC2_PHY_8_BIT
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
 #define CONFIG_USBID_ADDR              0x34052c46
 
 #define CONFIG_SYS_ICACHE_OFF