Blackfin: move CONFIG_BFIN_CPU back to board config.h

[people/ms/u-boot.git] / include / configs / bf561-ezkit.h

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 036bfe412faa7ffea9b777202e38071a6800c75e..7081d5f0db8ac769c4661bc6176dd014f7a52109 100644 (file)
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -96,15 +96,10 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       arch/blackfin/cpu/traps.o               (.text .text.*); \
-       arch/blackfin/cpu/interrupt.o   (.text .text.*); \
-       arch/blackfin/cpu/serial.o              (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib/crc32.o             (.text .text.*); \
-       lib/zlib.o              (.text .text.*); \
-       board/bf561-ezkit/bf561-ezkit.o (.text .text.*); \
+       arch/blackfin/lib/libblackfin.o (.text*); \
+       arch/blackfin/cpu/libblackfin.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
@@ -112,46 +107,8 @@
  * I2C Settings
  */
 #define CONFIG_SOFT_I2C
-#ifdef CONFIG_SOFT_I2C
-#define PF_SCL PF0
-#define PF_SDA PF1
-#define I2C_INIT \
-       do { \
-               *pFIO0_DIR |= PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_ACTIVE \
-       do { \
-               *pFIO0_DIR |= PF_SDA; \
-               *pFIO0_INEN &= ~PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_TRISTATE \
-       do { \
-               *pFIO0_DIR &= ~PF_SDA; \
-               *pFIO0_INEN |= PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_READ ((*pFIO0_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO0_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO0_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO0_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO0_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
-#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 
 
 /*