flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / blackstamp.h

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 887f3fb3a348338c445f0f7bb9515ffb3c89e553..5044f73b065d694e2431be9eb70a956eb90754d1 100644 (file)
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BlackStamp board
+ * U-Boot - Configuration file for BlackStamp board
  * Configuration by Ben Matthews for UR LLE using bf533-stamp.h
  * as a template
  * See http://blackfin.uclinux.org/gf/project/blackstamp/
@@ -30,7 +30,7 @@
 /*
  * Board settings
  */
-#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 
 /* FLASH/ETHERNET uses the same address range
@@ -40,7 +40,6 @@
 #define SHARED_RESOURCES       1
 
 /* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
 
 /*
  * Clock Settings
@@ -69,17 +68,14 @@
  * Network settings
  */
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 #define CONFIG_IPADDR          192.168.0.15
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_GATEWAYIP       192.168.0.1
 #define CONFIG_SERVERIP                192.168.0.2
 #define CONFIG_HOSTNAME                blackstamp
-#define CONFIG_ROOTPATH                /checkout/uClinux-dist/romfs
+#define CONFIG_ROOTPATH                "/checkout/uClinux-dist/romfs"
 #define CONFIG_SYS_AUTOLOAD            "no"
-
-/* To remove hardcoding and enable MAC storage in EEPROM  */
-/* #define CONFIG_ETHADDR              02:80:ad:20:31:b8 */
 #endif
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -106,36 +102,19 @@
 #define CONFIG_AUTO_COMPLETE   1
 #define CONFIG_ENV_OVERWRITE   1
 
-#include <config_cmd_default.h>
-
-#ifdef CONFIG_DRIVER_SMC91111
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_PING
-#else
-# undef CONFIG_CMD_NET
-#endif
-
-#ifdef CONFIG_SOFT_I2C
-# define CONFIG_CMD_I2C
-#endif
-
 #define CONFIG_CMD_BOOTLDR
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_CPLBINFO
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_ELF
 
-#define CONFIG_BOOTDELAY     5
 #define CONFIG_BOOTCOMMAND   "run ramboot"
 #define CONFIG_BOOTARGS \
        "root=/dev/mtdblock0 rw " \
-       "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+       "clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
        "earlyprintk=" \
                "serial," \
-               "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
-               MK_STR(CONFIG_BAUDRATE) " " \
-       "console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+               "uart" __stringify(CONFIG_UART_CONSOLE) "," \
+               __stringify(CONFIG_BAUDRATE) " " \
+       "console=ttyBF0," __stringify(CONFIG_BAUDRATE)
 
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
@@ -149,7 +128,7 @@
                "eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   define UBOOT_ENV_UPDATE \
-               "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+               "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
                "sf erase 0 0x40000;" \
                "sf write $(loadaddr) 0 $(filesize)"
 #  endif
@@ -196,6 +175,7 @@
 #define CONFIG_BAUDRATE                57600
 #define CONFIG_LOADS_ECHO      1
 #define CONFIG_UART_CONSOLE    0
+#define CONFIG_BFIN_SERIAL
 
 /*
  * I2C settings
@@ -204,35 +184,11 @@
  * Note these pins are arbitrarily chosen because we aren't using
  * them yet. You can (and probably should) change these values!
  */
-#ifdef CONFIG_SOFT_I2C
-
-#define PF_SCL                 PF9
-#define PF_SDA                 PF8
-
-#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED           50000
-#define CONFIG_SYS_I2C_SLAVE           0xFE
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0xFE
 #endif
 
 /*
@@ -247,8 +203,6 @@
 /* For the M25P64 SCK Should be Kept < 15Mhz */
 #define CONFIG_ENV_SPI_MAX_HZ  15000000
 #define CONFIG_SF_DEFAULT_SPEED        15000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 /*
  * FLASH organization and environment definitions
@@ -260,13 +214,6 @@
 #define CONFIG_EBIU_SDRRC_VAL          0x268
 #define CONFIG_EBIU_SDGCTL_VAL         0x911109
 
-/* Even though Rev C boards have Parallel Flash
- * We aren't supporting it. Newer versions of the
- * hardware don't support Parallel Flash at all.
- */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_FLASH
 
 #endif