Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / calimain.h

diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index 425a38f55197e2e16f20c963dea86a3deb36a072..854dc1ffedf019f83054120cb76b9ad50f008112 100644 (file)
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -21,16 +21,11 @@
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_DAVINCI_CALIMAIN
-#define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
-#define CONFIG_SOC_DA850               /* TI DA850 SoC */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          calimain_get_osc_freq()
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_TEXT_BASE           0x60000000
-#define CONFIG_DA850_LOWLEVEL
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DA8XX_GPIO
 #define CONFIG_HW_WATCHDOG
@@ -43,20 +38,6 @@
 /*
  * PLL configuration
  */
-#define CONFIG_SYS_DV_CLKMODE          0
-#define CONFIG_SYS_DA850_PLL0_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
-#define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
-
-#define CONFIG_SYS_DA850_PLL1_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
 
 #define CONFIG_SYS_DA850_PLL0_PLLM \
        ((calimain_get_osc_freq() == 25000000) ? 23 : 24)
@@ -154,7 +135,6 @@
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_PROTECTION
@@ -176,9 +156,7 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
@@ -189,15 +167,9 @@
  */
 #define CONFIG_BOOTFILE        "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_LOADADDR        0xc0700000
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -207,7 +179,6 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS           ""
 #define CONFIG_BOOTCOMMAND        "run checkupdate; run checkbutton;"
 #define CONFIG_BOOT_RETRY_TIME    60  /* continue boot after 60 s inactivity */
 #define CONFIG_RESET_TO_RETRY
@@ -297,21 +268,11 @@
        "echo Product: $product; "      \
        "gpio c 1; gpio c 2;"
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_SAVES
-
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000
 /* initial stack pointer in internal SRAM */
 #define CONFIG_SYS_INIT_SP_ADDR                (0x8001ff00)
 
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_LE                /* Use little-endian accessors */
 #define CONFIG_SYS_BOOTCOUNT_ADDR      DAVINCI_RTC_BASE
 
@@ -319,4 +280,6 @@
 int calimain_get_osc_freq(void);
 #endif
 
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */