arm: mach-omap2: Generate MLO file from SD boot capable targets

[people/ms/u-boot.git] / include / configs / canmb.h

diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 7b90dcb5ace4dc210cf9397930bd379a97337554..b7c74b42647aaccfe4d9130208a770f90eccb994 100644 (file)
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -13,8 +13,7 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* More exactly a MPC5200 */
+#define CONFIG_MPC5200         1       /* This is a MPC5200 CPU */
 #define CONFIG_CANMB           1       /* ... on canmb board - we need this for FEC.C */
 
 /*
@@ -34,10 +33,8 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     1       /* console is on PSC1 */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
 /*
  * BOOTP options
  */
@@ -46,21 +43,10 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
 
 /*
  * MUST be low boot - HIGHBOOT is not supported anymore
@@ -75,7 +61,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -143,7 +128,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
 #define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -174,7 +158,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CBSIZE            1024    /* Console I/O Buffer Size  */
 #else
@@ -189,8 +172,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x200000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_RTC_MPC5200     1       /* use internal MPC5200 RTC */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */