usb: net: migrate USB Ethernet adapters to Kconfig

[people/ms/u-boot.git] / include / configs / cgtqmx6eval.h

diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 487c011cc2de09a1f82046198d489a9e75f49a90..8f7f26b9edbba3aeae86d57f97dd86ab982d0a55 100644 (file)
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -18,10 +18,6 @@
 #define CONFIG_MACH_TYPE       4122
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 #include "imx6_spl.h"
@@ -30,8 +26,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_MXC_UART
@@ -41,7 +35,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* SPI NOR */
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_SST
@@ -50,14 +43,10 @@
 #define CONFIG_SF_DEFAULT_SPEED                20000000
 #define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
 /* Thermal support */
 #define CONFIG_IMX_THERMAL
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
@@ -72,53 +61,17 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "Congatec"
-
-/* USB Device Firmware Update support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
-#define CONFIG_DFU_SF
-
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -133,7 +86,6 @@
 #define CONFIG_IMX_HDMI
 
 /* SATA */
-#define CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
@@ -142,22 +94,18 @@
 #define CONFIG_LIBATA
 
 /* Ethernet */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         6
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Command definition */
 
 #define CONFIG_MXC_UART_BASE   UART2_BASE
-#define CONFIG_CONSOLE_DEV     "ttymxc1"
+#define CONSOLE_DEV    "ttymxc1"
 #define CONFIG_MMCROOT         "/dev/mmcblk0p2"
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
@@ -169,7 +117,7 @@
        "fdt_addr_r=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "console=" CONFIG_CONSOLE_DEV "\0" \
+       "console=" CONSOLE_DEV "\0" \
        "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
        "dfu_alt_info_spl=spl raw 0x400\0" \
        "dfu_alt_info_img=u-boot raw 0x10000\0" \
@@ -269,7 +217,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS          1
 #define PHYS_SDRAM                    MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                               (1u * 1024 * 1024 * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE         PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -288,7 +235,6 @@
 
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)