Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / cm_fx6.h

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index b36ba14be72f91afea0fbfa123da3d2fcb20b435..bd494126490b2218745c899c92e9233a068b4adf 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -18,7 +18,7 @@
 #define CONFIG_MACH_TYPE               4273
 
 /* CMD */
-#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MTDPARTS
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM       3
@@ -54,6 +54,19 @@
 #define CONFIG_SF_DEFAULT_SPEED                25000000
 #define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
 
+/* MTD support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_SPI_FLASH_MTD
+#endif
+
+#define MTDIDS_DEFAULT         "nor0=spi0.0"
+#define MTDPARTS_DEFAULT       "mtdparts=spi0.0:" \
+                               "768k(uboot)," \
+                               "256k(uboot-environment)," \
+                               "-(reserved)"
+
 /* Environment */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
@@ -70,6 +83,8 @@
        "stderr=serial,vga\0" \
        "panel=HDMI\0" \
        "autoload=no\0" \
+       "uImage=uImage-cm-fx6\0" \
+       "zImage=zImage-cm-fx6\0" \
        "kernel=uImage-cm-fx6\0" \
        "script=boot.scr\0" \
        "dtb=cm-fx6.dtb\0" \
@@ -82,10 +97,12 @@
        "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
        "doboot=bootm ${loadaddr}\0" \
        "doloadfdt=false\0" \
-       "setboottypez=setenv kernel zImage-cm-fx6;" \
+       "mtdids=" MTDIDS_DEFAULT "\0" \
+       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "setboottypez=setenv kernel ${zImage};" \
                "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
                "setenv doloadfdt true;\0" \
-       "setboottypem=setenv kernel uImage-cm-fx6;" \
+       "setboottypem=setenv kernel ${uImage};" \
                "setenv doboot bootm ${loadaddr};" \
                "setenv doloadfdt false;\0"\
        "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
@@ -93,13 +110,13 @@
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=ubifs\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
-               "${video}\0" \
+               "${video} ${extrabootargs}\0" \
        "sataargs=setenv bootargs console=${console} root=${sataroot} " \
-               "${video}\0" \
+               "${video} ${extrabootargs}\0" \
        "nandargs=setenv bootargs console=${console} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype} " \
-               "${video}\0" \
+               "${video} ${extrabootargs}\0" \
        "nandboot=if run nandloadkernel; then " \
                        "run nandloadfdt;" \
                        "run setboottypem;" \
@@ -156,7 +173,7 @@
        "run setupnandboot;" \
        "run nandboot;"
 
-#define CONFIG_PREBOOT         "usb start"
+#define CONFIG_PREBOOT         "usb start;sf probe"
 
 /* SPI */
 #define CONFIG_SPI
@@ -229,16 +246,12 @@
 
 /* SPL */
 #include "imx6_spl.h"
-#define CONFIG_SPL_MMC_SUPPORT
+#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x80 /* offset 64 kb */
-#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
 /* Display */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK          260000000
 #define CONFIG_IMX_HDMI
@@ -256,4 +269,15 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
+#define CONFIG_SYS_EEPROM_SIZE                 256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
+
 #endif /* __CONFIG_CM_FX6_H */