ns16550: move CONFIG_SYS_NS16550 to Kconfig

[people/ms/u-boot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index cfc4f9bb8ebb2856c6508ca1e0c304d876453cfb..2dc745e59ff7f1ed4602260b03b12a128ea69c45 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -21,16 +21,18 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP    /* in a TI OMAP core */
-#define CONFIG_OMAP34XX        /* which is a 34XX */
 #define CONFIG_OMAP_GPIO
-#define CONFIG_CMD_GPIO
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -68,7 +70,6 @@
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
@@ -96,7 +97,7 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_UDC
+#define CONFIG_USB_MUSB_UDC
 #define CONFIG_TWL4030_USB
 #define CONFIG_CMD_USB
 
@@ -104,12 +105,8 @@
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/* This delay is really for slow-to-power-on USB sticks, not the hub */
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
@@ -127,9 +124,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -138,6 +132,7 @@
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_BUS      0
 #define CONFIG_I2C_MULTI_BUS
 
 /*
@@ -149,7 +144,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
@@ -158,6 +152,7 @@
                                                        /* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
+
 /* Environment information */
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -223,7 +218,6 @@
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              "CM-T3x # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -259,9 +253,6 @@
  */
 
 /* **** PISMO SUPPORT *** */
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
@@ -313,6 +304,7 @@
 
 #define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
@@ -320,14 +312,13 @@
 #define CONFIG_OMAP3_SPI
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -368,7 +359,6 @@
 
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the