Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 017a8bd47f1b7bdd20d729c2a31c89448156522d..ee7c9de9690cbd86a80d87c00581223e6d6bb497 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -22,13 +22,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP    /* in a TI OMAP core */
-#define CONFIG_OMAP_GPIO
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -76,14 +70,11 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 
 /* USB */
 #define CONFIG_USB_OMAP3
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_USB_MUSB_UDC
 #define CONFIG_TWL4030_USB
 
@@ -102,7 +93,6 @@
 
 #define CONFIG_CMD_NAND                /* NAND support                 */
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
@@ -115,7 +105,6 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER
 #define CONFIG_TWL4030_LED
 
 /*
@@ -255,20 +244,12 @@
 
 #define CONFIG_SPLASHIMAGE_GUARD
 
-/* GPIO banks */
-#ifdef CONFIG_LED_STATUS
-#define CONFIG_OMAP3_GPIO_6    /* GPIO186 is in GPIO bank 6  */
-#endif
-
 /* Display Configuration */
-#define CONFIG_OMAP3_GPIO_2
-#define CONFIG_OMAP3_GPIO_5
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP                LCD_COLOR16
 
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SOURCE
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
@@ -281,7 +262,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -325,14 +305,10 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 #define CONFIG_SYS_EEPROM_SIZE                 256
 
-#define CONFIG_CMD_EEPROM_LAYOUT
-#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3"
-
 #endif /* __CONFIG_H */