Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / cm_t43.h

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 1c1951c4c5ff9ea8365cbcb0749649d29569068b..1e63098d5f17f0f50e3a000683f09046ac022b84 100644 (file)
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -60,11 +60,7 @@
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 
 /* USB support */
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
@@ -82,7 +78,6 @@
 /* Enabling L2 Cache */
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE          0x48242000
-#define CONFIG_SYS_CACHELINE_SIZE      32
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -95,13 +90,7 @@
 #define CONFIG_HSMMC2_8BIT
 
 #include <configs/ti_armv7_omap.h>
-#undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_SPL_NAND_SUPPORT
 #undef CONFIG_SYS_MONITOR_LEN
-#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_CMD_IMLS
 
 #define CONFIG_ENV_SIZE                        (16 * 1024)
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -114,11 +103,7 @@
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 #define CONFIG_ENV_SPI_MAX_HZ           48000000
 
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
@@ -155,21 +140,20 @@
                "run emmcboot; " \
        "fi;"
 
-
 #define CONFIG_CONS_INDEX              1
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE           0x40300350
-#define CONFIG_SPL_MAX_SIZE            (64 * 1024)
 #define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (256 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x480
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
+
+/* EEPROM */
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
+#define CONFIG_SYS_EEPROM_SIZE                 256
 
 #endif /* __CONFIG_CM_T43_H */