configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / colibri_imx7.h

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 16ae952f37ccc711b80072c25f1ad68c2a31d79a..ffcd98bf7646e6306c1129eb8c38ea3bf3ce60c7 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -14,27 +14,17 @@
 
 #include "mx7_common.h"
 
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
-
 /*#define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE                        SZ_512M
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE  /* Calls show_board_info() */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
 
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE                        0x4000
-
-#define CONFIG_CMD_BMODE
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -59,9 +49,7 @@
 #undef CONFIG_BOOTM_RTEMS
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_SPEED           100000
 
 #define CONFIG_IPADDR                  192.168.10.2
@@ -69,6 +57,7 @@
 #define CONFIG_SERVERIP                        192.168.10.1
 
 #define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
        "fdt_addr_r=0x82000000\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
@@ -127,13 +116,14 @@
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "setup=setenv setupargs " \
                "console=tty1 console=${console}" \
-               ",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
+               ",${baudrate}n8 ${memargs} consoleblank=0\0" \
        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
        "setusbupdate=usb start && setenv interface usb && " \
                "fatload ${interface} 0:1 ${loadaddr} " \
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "splashpos=m,m\0" \
        "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
+       "updlevel=2\0"
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
@@ -144,8 +134,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -159,8 +147,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_IS_IN_NAND
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
@@ -169,8 +156,8 @@
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"  /* USDHC1 */
 #define CONFIG_ENV_OFFSET              (8 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_OFFSET              (4 * 1024 * 1024)
 #define CONFIG_ENV_SECT_SIZE           (128 * 1024)
+#define CONFIG_ENV_OFFSET              (28 * CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
 #endif
 
@@ -185,19 +172,14 @@
 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 #define CONFIG_CMD_NAND_TORTURE
 
-/* UBI stuff */
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS       /* increases size by almost 60 KB */
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS    /* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define MTDIDS_DEFAULT         "nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT       "mtdparts=gpmi-nand:"           \
                                "512k(mx7-bcb),"                \
-                               "3584k(u-boot)ro,"              \
+                               "1536k(u-boot1)ro,"             \
+                               "1536k(u-boot2)ro,"             \
                                "512k(u-boot-env),"             \
                                "-(ubi)"
 
@@ -223,17 +205,11 @@
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO