/*
- * Copyright 2015 Toradex, Inc.
+ * Copyright 2015-2016 Toradex, Inc.
*
- * Configuration settings for the Toradex VF50/VF61 module.
+ * Configuration settings for the Toradex VF50/VF61 modules.
*
* Based on vf610twr.h:
* Copyright 2013 Freescale Semiconductor, Inc.
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
#include <asm/arch/imx-regs.h>
-#define CONFIG_VF610
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_SYS_FSL_CLK
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_FSL_DCU_LE
+
+#define CONFIG_SYS_DCU_ADDR DCU0_BASE_ADDR
+#define DCU_LAYER_MAX_NUM 64
+#endif
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_CMD_ASKENV
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
/* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nand0=vf610_nfc"
"512k(u-boot-env)," \
"-(ubi)"
-#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT4
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_UBI
-#define CONFIG_MTD_UBI_FASTMAP
-#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
-
-#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET1_BASE_ADDR
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BOARD_LATE_INIT
-
#define CONFIG_LOADADDR 0x80008000
#define CONFIG_FDTADDR 0x84000000
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
"dhcp ${kernel_addr_r} && " \
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
- "ubi part ubi && ubifsmount ubi0:rootfs && " \
- "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
- "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "ubi part ubi && " \
+ "ubi read ${kernel_addr_r} kernel && " \
+ "ubi read ${fdt_addr_r} dtb && " \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
"kernel_file=zImage\0" \
"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
"fdt_board=eval-v3\0" \
+ "fdt_fixup=;\0" \
"defargs=\0" \
"console=ttyLP0\0" \
"setup=setenv setupargs " \
"setupdate=run setsdupdate || run setusbupdate\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+ "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
+ "splashpos=m,m\0" \
SD_BOOTCMD \
NFS_BOOTCMD \
UBI_BOOTCMD
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
-#define CONFIG_SYS_NO_FLASH
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
#endif
-#define CONFIG_CMD_BOOTZ
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
/* USB Host Support */
-#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-/* USB Client Support */
-#define CONFIG_TRDX_VID 0x1B67
-#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
-#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
-#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
-#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
-
/* USB DFU */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
-#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
/* USB Storage */
-#define CONFIG_USB_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_CMD_USB_MASS_STORAGE
#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / blobdiff