config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[people/ms/u-boot.git] / include / configs / colibri_vf.h

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 9135d6c624ccde198ced3c5255160eef8a2b371b..d2d4330ddc143929543d54517502dddc9e078126 100644 (file)
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -1,7 +1,7 @@
 /*
- * Copyright 2015 Toradex, Inc.
+ * Copyright 2015-2016 Toradex, Inc.
  *
- * Configuration settings for the Toradex VF50/VF61 module.
+ * Configuration settings for the Toradex VF50/VF61 modules.
  *
  * Based on vf610twr.h:
  * Copyright 2013 Freescale Semiconductor, Inc.
@@ -16,13 +16,10 @@
 
 #define CONFIG_VF610
 #define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE  /* Calls show_board_info() */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -36,16 +33,11 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_FSL_LPUART
-#define LPUART_BASE                    UART0_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_CMD_ASKENV
 
 /* NAND support */
 #define CONFIG_CMD_NAND
@@ -53,10 +45,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 
-/* GPIO support */
-#define CONFIG_DM_GPIO
-#define CONFIG_VYBRID_GPIO
-
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS    /* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
@@ -68,31 +56,17 @@
                                "512k(u-boot-env),"             \
                                "-(ubi)"
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT3
-#define CONFIG_CMD_EXT4
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_RBTREE
 #define CONFIG_LZO
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_UBI
-#define CONFIG_MTD_UBI_FASTMAP
 #define CONFIG_CMD_UBIFS       /* increases size by almost 60 KB */
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET1_BASE_ADDR
@@ -105,9 +79,6 @@
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_SERVERIP                192.168.10.1
 
-#define CONFIG_BOOTDELAY               1
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_LOADADDR                        0x80008000
 #define CONFIG_FDTADDR                 0x84000000
 
@@ -121,7 +92,7 @@
        "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
        "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
        "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define NFS_BOOTCMD \
        "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -130,7 +101,7 @@
        "${setupargs} ${vidargs}; echo Booting from NFS...;" \
        "dhcp ${kernel_addr_r} && "     \
        "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define UBI_BOOTCMD    \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
@@ -138,10 +109,10 @@
        "ubiboot=run setup; " \
        "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
        "${setupargs} ${vidargs}; echo Booting from NAND...; " \
-       "ubi part ubi && ubifsmount ubi0:rootfs && " \
-       "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
-       "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "ubi part ubi && " \
+       "ubi read ${kernel_addr_r} kernel && " \
+       "ubi read ${fdt_addr_r} dtb && " \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 
@@ -153,6 +124,7 @@
        "kernel_file=zImage\0" \
        "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
        "fdt_board=eval-v3\0" \
+       "fdt_fixup=;\0" \
        "defargs=\0" \
        "console=ttyLP0\0" \
        "setup=setenv setupargs " \
@@ -173,8 +145,6 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              \
@@ -182,7 +152,6 @@
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80010000
 #define CONFIG_SYS_MEMTEST_END         0x87C00000
 
@@ -225,52 +194,18 @@
 #define CONFIG_ENV_OFFSET              (12 * 64 * 2048)
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
 /* USB Host Support */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_VF
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-/* USB Client Support */
-#define CONFIG_USB_GADGET
-#define CONFIG_CI_UDC
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW      2
-#define CONFIG_TRDX_VID                  0x1B67
-#define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
-#define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
-#define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
-#define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
-#define CONFIG_G_DNL_MANUFACTURER        "Toradex"
-#define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
-#define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
-
 /* USB DFU */
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
-#define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 
 /* USB Storage */
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_CMD_USB_MASS_STORAGE
-
-/* Enable SPI support */
-#ifdef CONFIG_OF_CONTROL
-#define CONFIG_DM_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_FSL_DSPI
-#endif
 
 #endif /* __CONFIG_H */