Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / controlcenterd.h

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index af4676e9925bd49759220ac23b309768f1c18894..452c8aae7a64776f4a08ebc5b6e2caad93d9b5ab 100644 (file)
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -26,10 +26,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif
@@ -39,22 +35,10 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE                   /* BOOKE */
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_P1022
 #define CONFIG_CONTROLCENTERD
 #define CONFIG_MP                      /* support multiple processors */
 
-
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
-
-#ifdef CONFIG_TRAILBLAZER
-#define CONFIG_IDENT_STRING    " controlcenterd trailblazer 0.01"
-#else
-#define CONFIG_IDENT_STRING    " controlcenterd 0.01"
-#endif
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_ADDR_MAP
@@ -98,7 +82,6 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
-
 /*
  * Memory map
  *
@@ -138,8 +121,6 @@
 #define CONFIG_SYS_SDRAM_SIZE 1024
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_SYS_FSL_DDR3
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -155,7 +136,6 @@
 /*
  * Local Bus Definitions
  */
-#define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 
 #define CONFIG_SYS_ELBC_BASE           0xe0000000
 #ifdef CONFIG_PHYS_64BIT
@@ -201,12 +181,10 @@
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_CMD_I2C
 #endif
 
 #define CONFIG_PCA9698                 /* NXP PCA9698 */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -216,26 +194,16 @@
  */
 #define CONFIG_HARD_SPI
 
-#define CONFIG_SPI_FLASH_STMICRO
-
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
 #define CONFIG_SF_DEFAULT_MODE         0
 #endif
 
-#define CONFIG_SHA1
-
 /*
  * MMC
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
-
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
-
 #ifndef CONFIG_TRAILBLAZER
 
 /*
@@ -243,19 +211,13 @@
  */
 #define CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x10000)
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_CMD_BMP
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 #define CONFIG_CMD_PCI
@@ -326,9 +288,6 @@
 /*
  * USB
  */
-#define CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI_FSL
@@ -360,13 +319,10 @@
 
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 /*
  * Command line configuration.
  */
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
@@ -386,35 +342,18 @@
 #ifndef CONFIG_TRAILBLAZER
 
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /*
  * Board initialisation callbacks
  */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 #else /* CONFIG_TRAILBLAZER */
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
@@ -426,7 +365,6 @@
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_DOS_PARTITION
 
 /*
  * For booting Linux, the board info and command line data
@@ -441,10 +379,6 @@
  */
 
 #ifdef CONFIG_TRAILBLAZER
-
-#define CONFIG_BOOTDELAY       0       /* -1 disables auto-boot */
-#define CONFIG_BAUDRATE        115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "mp_holdoff=1\0"
 
@@ -457,10 +391,6 @@
 
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
-
-#define CONFIG_BAUDRATE        115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "netdev=eth0\0"                                         \
        "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
@@ -474,7 +404,7 @@
        "consoledev=ttyS1\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=controlcenterd.dtb\0"                          \
        "bdev=sda3\0"