Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / corvus.h

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index eb1584d3cc6a6038a7da0bc6540883635d8606b0..a1fd93f21226936b7e22f0f5b219e93d5d039a19 100644 (file)
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -15,10 +15,7 @@
 #define __CONFIG_H
 
 #include <asm/hardware.h>
-
-#define MACH_TYPE_CORVUS               2066
-
-#define CONFIG_SYS_GENERIC_BOARD
+#include <linux/sizes.h>
 
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
@@ -27,7 +24,7 @@
  * hex number here!
  */
 
-#define CONFIG_SYS_TEXT_BASE  0x73f00000
+#define CONFIG_SYS_TEXT_BASE  0x72000000
 
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 
@@ -43,7 +40,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 
 #define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -73,13 +69,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
@@ -91,7 +80,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
 
 /* No NOR flash */
 #define CONFIG_SYS_NO_FLASH
@@ -108,7 +97,6 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC8
-
 #endif
 
 /* Ethernet */
@@ -124,13 +112,37 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_USB_STORAGE
 
-#define CONFIG_SYS_LOAD_ADDR           0x72000000      /* load address */
+/* USB DFU support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+
+/* DFU class support */
+#define CONFIG_CMD_DFU
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_NAND
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE   (SZ_1M)
+#define DFU_MANIFEST_POLL_TIMEOUT      25000
+
+/* USB DFU IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0908
+#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
+#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
+
+#define CONFIG_SYS_CACHELINE_SIZE      SZ_8K
+#define CONFIG_SYS_LOAD_ADDR   ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x100000
 #define CONFIG_ENV_OFFSET_REDUND       0x180000
-#define CONFIG_ENV_SIZE                        0x20000
+#define CONFIG_ENV_SIZE                        SZ_128K
 
 #define CONFIG_BOOTCOMMAND                                             \
        "nand read 0x70000000 0x200000 0x300000;"                       \
@@ -144,7 +156,6 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE +    \
@@ -158,6 +169,52 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + \
-                               128*1024, 0x1000)
+                               SZ_4M, 0x1000)
+
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x300000
+#define CONFIG_SPL_MAX_SIZE            (12 * SZ_1K)
+#define CONFIG_SPL_STACK               (SZ_16K)
+
+#define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_BSS_MAX_SIZE                (SZ_2K)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x20000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
+#define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+#define CONFIG_SYS_NAND_PAGE_SIZE      SZ_2K
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (SZ_128K)
+#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
+                                        CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCSIZE                256
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_ECCPOS         { 40, 41, 42, 43, 44, 45, 46, 47, \
+                                         48, 49, 50, 51, 52, 53, 54, 55, \
+                                         56, 57, 58, 59, 60, 61, 62, 63, }
+
+#define CONFIG_SPL_ATMEL_SIZE
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define AT91_PLL_LOCK_TIMEOUT          1000000
+#define CONFIG_SYS_AT91_PLLA           0x20c73f03
+#define CONFIG_SYS_MCKR                        0x1301
+#define CONFIG_SYS_MCKR_CSS            0x1302
 
 #endif