mx53: Add Board support for GE PPD

[people/ms/u-boot.git] / include / configs / cyrus.h

diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h
index dfeee513a47ede02b339e5662b57cd823c0cb34b..1b20d85acfc5136336721cea5f49ef2a98563e08 100644 (file)
--- a/include/configs/cyrus.h
+++ b/include/configs/cyrus.h
@@ -58,7 +58,6 @@
 
 #if defined(CONFIG_SDCARD)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_SYS_MMC_ENV_DEV          0
 #define CONFIG_ENV_SIZE                        0x2000
@@ -239,7 +238,6 @@
 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 
-#define CONFIG_CMD_DATE                        1
 #define CONFIG_RTC_MCP79411            1
 #define CONFIG_SYS_RTC_BUS_NUM         3
 #define CONFIG_SYS_I2C_RTC_ADDR                0x6f
@@ -368,13 +366,10 @@
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
 #endif
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #endif /* CONFIG_PCI */
@@ -393,14 +388,12 @@
 #define CONFIG_SYS_SATA2_FLAGS         FLAGS_DMA
 
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
 #endif
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_TBIPA_VALUE 8
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC4"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -409,17 +402,6 @@
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
-
 /*
  * USB
  */
@@ -427,11 +409,9 @@
 #define CONFIG_HAS_FSL_MPH_USB
 
 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_SYS_USB_EVENT_POLL
  /* _VIA_CONTROL_EP  */
 #endif
 
@@ -448,14 +428,6 @@
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data