Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[people/ms/u-boot.git] / include / configs / da850evm.h

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 3ce905859e97e198f5515d5d6497bf2c895692da..43646490ec3579b09c5be829c27e08258ed004b0 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -20,6 +20,16 @@
 #define CONFIG_USE_SPIFLASH
 #endif
 
+/*
+* Disable DM_* for SPL build and can be re-enabled after adding
+* DM support in SPL
+*/
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_DM_I2C
+#undef CONFIG_DM_I2C_COMPAT
+#endif
 /*
  * SoC Configuration
  */
@@ -130,18 +140,23 @@
 /*
  * Serial Driver info
  */
+
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_DIRECT_NOR_BOOT)
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of UART2 */
+#endif
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 
 #define CONFIG_SPI
 #define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #define CONFIG_ENV_SPI_MAX_HZ  CONFIG_SF_DEFAULT_SPEED
+#endif
 
 #ifdef CONFIG_USE_SPIFLASH
 #define CONFIG_SPL_SPI_LOAD
@@ -152,19 +167,16 @@
 /*
  * I2C Configuration
  */
-#define CONFIG_SYS_I2C
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED           25000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
+#endif
 
 /*
  * Flash & Environment
  */
 #ifdef CONFIG_USE_NAND
-#undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE                        (128 << 10)
 #define        CONFIG_SYS_NAND_USE_FLASH_BBT
@@ -202,7 +214,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_LOAD
 #endif
 
@@ -218,7 +229,6 @@
 #endif
 
 #ifdef CONFIG_USE_NOR
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_PROTECTION
@@ -234,12 +244,14 @@
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        (64 << 10)
 #define CONFIG_ENV_OFFSET              (512 << 10)
 #define CONFIG_ENV_SECT_SIZE           (64 << 10)
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_SPI_FLASH_MTD
+#endif
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS          /* required for UBI partition support */
 #endif
 
 /*
@@ -248,14 +260,11 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -266,16 +275,29 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS                \
-       "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
-#define CONFIG_EXTRA_ENV_SETTINGS      "hwconfig=dsp:wake=yes"
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SAVES
+#define CONFIG_BOOTCOMMAND \
+               "run envboot; " \
+               "run mmcboot; "
+
+#define DEFAULT_LINUX_BOOT_ENV \
+       "loadaddr=0xc0700000\0" \
+       "fdtaddr=0xc0600000\0" \
+       "scriptaddr=0xc0600000\0"
+
+#include <environment/ti/mmc.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       DEFAULT_MMC_TI_ARGS \
+       "bootpart=0:2\0" \
+       "bootdir=/boot\0" \
+       "bootfile=zImage\0" \
+       "fdtfile=da850-evm.dtb\0" \
+       "boot_fdt=yes\0" \
+       "boot_fit=0\0" \
+       "console=ttyS2,115200n8\0" \
+       "hwconfig=dsp:wake=yes"
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
@@ -285,14 +307,8 @@
 #endif
 
 #ifdef CONFIG_USE_NAND
-#define CONFIG_CMD_NAND
-
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_LZO
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBIFS
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
@@ -301,20 +317,16 @@
 #if !defined(CONFIG_USE_NAND) && \
        !defined(CONFIG_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                (16 << 10)
-#undef CONFIG_CMD_ENV
 #endif
 
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_LDSCRIPT    "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 #define CONFIG_SPL_STACK       0x8001ff00
 #define CONFIG_SPL_TEXT_BASE   0x80000000
 #define CONFIG_SPL_MAX_FOOTPRINT       32768
@@ -335,4 +347,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
                                        GENERATED_GBL_DATA_SIZE)
 #endif /* CONFIG_DIRECT_NOR_BOOT */
+
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */