drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / db-88f6820-gp.h

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 24dbf6bf713d7a72a941b30320f0e5b17af89345..76370aa61565ad59a16213273edc8d1eaae196d6 100644 (file)
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -10,31 +10,24 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_ARMADA_XP               /* SOC Family Name */
-#define CONFIG_DB_88F6820_GP           /* Board target name for DDR training */
 
-#define CONFIG_SYS_L2_PL310
-
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
-#define        CONFIG_SYS_TEXT_BASE    0x04000000
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define        CONFIG_SYS_TEXT_BASE    0x00800000
 #define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
+#define CONFIG_CMD_PCI
+#define CONFIG_SCSI
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -46,7 +39,37 @@
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED                1000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
+
+/*
+ * SDIO/MMC Card Configuration
+ */
+#define CONFIG_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MV_SDHCI
+#define CONFIG_SYS_MMC_BASE            MVEBU_SDIO_BASE
+
+/*
+ * SATA/SCSI/AHCI configuration
+ */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                        CONFIG_SYS_SCSI_MAX_LUN)
+
+/* Partition support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/* Additional FS support/configuration */
+#define CONFIG_SUPPORT_VFAT
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -55,11 +78,15 @@
 #define CONFIG_ENV_SECT_SIZE           (256 << 10) /* 256KiB sectors */
 
 #define CONFIG_PHY_MARVELL             /* there is a marvell phy */
-#define CONFIG_PHY_ADDR                        { 1, 0 }
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
+/* PCIe support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI_MVEBU
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
 #define CONFIG_SYS_ALT_MEMTEST
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
@@ -67,6 +94,53 @@
        "fdt_high=0x10000000\0"         \
        "initrd_high=0x10000000\0"
 
+/* SPL */
+/*
+ * Select the boot device here
+ *
+ * Currently supported are:
+ * SPL_BOOT_SPI_NOR_FLASH      - Booting via SPI NOR flash
+ * SPL_BOOT_SDIO_MMC_CARD      - Booting via SDIO/MMC card (partition 1)
+ */
+#define SPL_BOOT_SPI_NOR_FLASH         1
+#define SPL_BOOT_SDIO_MMC_CARD         2
+#define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
+
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_SIZE                        (140 << 10)
+#define CONFIG_SPL_TEXT_BASE           0x40000030
+#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x0030)
+
+#define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE                (16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
+
+#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x24000
+#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
+#endif
+
+#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+/* SPL related MMC defines */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
+#define CONFIG_SYS_MMC_U_BOOT_OFFS             (160 << 10)
+#define CONFIG_SYS_U_BOOT_OFFS                 CONFIG_SYS_MMC_U_BOOT_OFFS
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        (CONFIG_SYS_U_BOOT_OFFS / 512)
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     ((512 << 10) / 512) /* 512KiB */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER      0x00180000      /* in SDRAM */
+#endif
+#endif
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros