Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / dragonboard410c.h

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index 98b6688626087b7dfde925880754457cb7c6cb68..dfeea601a004e33e6fabc44fc373fce6b5ece39c 100644 (file)
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -20,10 +20,9 @@
 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
 #define PHYS_SDRAM_1_SIZE              0x3da00000
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE           0x80080000
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN           0x1000000 /* 16MB max kernel size */
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
 
 /* UART */
 
@@ -36,23 +35,13 @@
  * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
-
 /* Support all possible USB ethernet dongles */
-#define CONFIG_USB_ETHER_DM9601
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_ASIX88179
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
 
 /* Extra Commands */
 /* Enable that for switching of boot partitions */
 /* Disabled by default as some sub-commands can brick eMMC */
 /*#define CONFIG_SUPPORT_EMMC_BOOT */
 
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-
 #include <config_distro_defaults.h>
 
 /* BOOTP options */
@@ -99,7 +88,7 @@ REFLASH(dragonboard/u-boot.img, 8)\
        "initrd_high=0xffffffffffffffff\0" \
        "linux_image=Image\0" \
        "kernel_addr_r=0x81000000\0"\
-       "fdtfile=apq8016-sbc.dtb\0" \
+       "fdtfile=qcom/apq8016-sbc.dtb\0" \
        "fdt_addr_r=0x83000000\0"\
        "ramdisk_addr_r=0x84000000\0"\
        "scriptaddr=0x90000000\0"\
@@ -107,7 +96,7 @@ REFLASH(dragonboard/u-boot.img, 8)\
        BOOTENV
 
 #define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_SYS_MMC_ENV_DEV         0       /* mmc0 = emmc, mmc1 = sd */
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_8M)