configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / ea20.h

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 1d50a37d2fc8be63be197af9a8aebb8defc715f2..85db4700ad319841e9655ea8fc7e212962807b6a 100644 (file)
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -24,11 +24,11 @@
 #define CONFIG_VIDEO
 #define CONFIG_PREBOOT
 
+
 /*
  * SoC Configuration
  */
 #define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS               /* arm926ejs CPU core */
 #define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
 #define CONFIG_SOC_DA850               /* TI DA850 SoC */
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
@@ -58,7 +58,6 @@
 /*
  * Serial Driver info
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART0_BASE /* Base address of UART0 */
@@ -67,8 +66,6 @@
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
@@ -124,7 +121,6 @@
  * U-Boot general configuration
  */
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "ea20 > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
@@ -132,7 +128,6 @@
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -149,7 +144,6 @@
 /*
  * U-Boot commands
  */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
@@ -157,16 +151,13 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_GPIO
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_NET
 #undef CONFIG_CMD_DHCP
 #undef CONFIG_CMD_MII
 #undef CONFIG_CMD_PING
@@ -174,8 +165,6 @@
 
 /* NAND Setup */
 #ifdef CONFIG_SYS_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_NAND
 
 #define CONFIG_CMD_MTDPARTS
@@ -199,11 +188,8 @@
 
 /* SPI Flash */
 #ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_SF
-#define CONFIG_CMD_SAVEENV
 #endif
 
 #if !defined(CONFIG_SYS_USE_NAND) && \
@@ -212,7 +198,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE                (16 << 10)
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_ENV
 #endif
 
@@ -243,7 +228,6 @@
        "rootpath=/opt/eldk/arm\0"                                      \
        "splashpos=230,180\0"                                           \
        "testrfspath=/opt/eldk/test_arm\0"                              \
-       "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0"                    \
        "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "    \
        "ubi.mtd=${as} root=ubi0:rootfs\0"                              \
        "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "  \
@@ -316,6 +300,6 @@
                "fi;"                                                   \
                "else echo U-Boot not downloaded..exiting;fi\0" \
        "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"    \
-       "bootcmd=run tempmac;run net_testrfs\0"
+       "bootcmd=run net_testrfs\0"
 
 #endif /* __CONFIG_H */