Remove config_distro_defaults.h

[people/ms/u-boot.git] / include / configs / embestmx6boards.h

diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 58cee96ac313b3a2f58d248392fd2d8b07bb9a7d..5a9c48f8d098aabdf4cd62725d3eec8f1760f729 100644 (file)
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -14,8 +14,7 @@
 #define __RIOTBOARD_CONFIG_H
 
 #define CONFIG_MXC_UART_BASE           UART2_BASE
-#define CONFIG_CONSOLE_DEV             "ttymxc1"
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"
+#define CONSOLE_DEV            "ttymxc1"
 
 #define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
@@ -24,25 +23,17 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -58,32 +49,21 @@
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         4
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                20000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #endif
 
-#define CONFIG_CMD_BMODE
-
 #define CONFIG_ARP_TIMEOUT     200UL
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
-#define CONFIG_STACKSIZE               (128 * 1024)
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -120,23 +100,16 @@
 #endif
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
@@ -174,6 +147,7 @@
        CONSOLE_ENV_SETTINGS \
        MEM_LAYOUT_ENV_SETTINGS \
        "fdtfile=" CONFIG_FDTFILE "\0" \
+       "finduuid=part uuid mmc 0:1 uuid\0" \
        BOOTENV
 
 #endif                         /* __RIOTBOARD_CONFIG_H */