kconfig: introduce kconfig for UBI

[people/ms/u-boot.git] / include / configs / ethernut5.h

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 14a0f02c5e57c0c768863a638039566b175780c7..0895497ed38c4878c561c23d42c1a6fa6e800b6b 100644 (file)
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -4,23 +4,7 @@
  *
  * Configuation settings for Ethernut 5 with AT91SAM9XE.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -39,15 +23,12 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
 #define CONFIG_DISPLAY_CPUINFO         /* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768   /* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ                  1000
 
 /* 32kB internal SRAM */
 #define CONFIG_SRAM_BASE       0x00300000 /*AT91SAM9XE_SRAM_BASE */
@@ -77,8 +58,6 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000
 #define DATAFLASH_TCSS                 (0x1a << 16)
@@ -95,7 +74,6 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT      (5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK                   15000000
 
 /* Serial port */
@@ -109,51 +87,17 @@
 #define CONFIG_AT91_GPIO
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SPI
-
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
-#define CONFIG_CMD_ASKENV
+
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DNS
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RARP
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_USB
 #endif
 
 /* NAND flash */
@@ -166,12 +110,11 @@
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN     GPIO_PIN_PC(14)
 #endif
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
@@ -194,12 +137,12 @@
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "host"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* RTC */
@@ -210,10 +153,12 @@
 
 /* I2C */
 #define CONFIG_SYS_MAX_I2C_BUS 1
-#define CONFIG_SYS_I2C_SLAVE   0
-#define CONFIG_SYS_I2C_SPEED   100000
 
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT                    /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+
 #define I2C_SOFT_DECLARATIONS
 
 #define GPIO_I2C_SCL           AT91_PIO_PORTA, 24
@@ -258,7 +203,6 @@
 #define CONFIG_RBTREE
 
 /* Boot command */
-#define CONFIG_BOOTDELAY       3
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -271,8 +215,6 @@
 #endif
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_PROMPT              "U-Boot> "
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + 16 \