Convert CONFIG_CMD_BSP to Kconfig

[people/ms/u-boot.git] / include / configs / ethernut5.h

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index b79000e706a5cac3a672642ffdb505a6ef88dcbe..2ae39c04883b05fc9beff369c417093ea063bb24 100644 (file)
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,8 +12,6 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE   0x27000000      /* 16MB available */
 
@@ -21,11 +19,9 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Set our official architecture number. */
-#define MACH_TYPE_ETHERNUT5 1971
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_DISPLAY_CPUINFO         /* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
@@ -60,8 +56,6 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000
 #define DATAFLASH_TCSS                 (0x1a << 16)
@@ -83,7 +77,6 @@
 /* Serial port */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART3                  /* USART 3 is DBGU */
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
@@ -91,51 +84,15 @@
 #define CONFIG_AT91_GPIO
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SPI
-
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
+
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DNS
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RARP
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_USB
 #endif
 
 /* NAND flash */
@@ -166,8 +123,6 @@
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN          AT91_PIO_PORTC, 8
 #endif
@@ -181,7 +136,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "host"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* RTC */
@@ -234,15 +188,10 @@
 #define MTDIDS_DEFAULT         "nand0=atmel_nand"
 #define MTDPARTS_DEFAULT       "mtdparts=atmel_nand:-(root)"
 #endif
-#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
-       defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
 #define CONFIG_LZO
 #define CONFIG_RBTREE
 
 /* Boot command */
-#define CONFIG_BOOTDELAY       3
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -255,8 +204,6 @@
 #endif
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_PROMPT              "U-Boot> "
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + 16 \