common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / gr_cpci_ax2000.h

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index dd6c41d02cd930f20bfa19263e9ede7a6e462669..211dc38dfa1f044e3ccf4a2ff765c5c4365c2a78 100644 (file)
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -8,23 +8,7 @@
  * (C) Copyright 2008
  * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
@@ -35,8 +19,6 @@
  * (easy to change)
  */
 
-#define CONFIG_LEON3           /* This is an LEON3 CPU */
-#define CONFIG_LEON            1       /* This is an LEON CPU */
 #define CONFIG_CPCI_AX2000     1       /* ... on GR-CPCI-AX2000 board */
 
 #define CONFIG_LEON_RAM_SRAM 1
@@ -60,9 +42,6 @@
 /* CPU / AMBA BUS configuration */
 #define CONFIG_SYS_CLK_FREQ    20000000        /* 20MHz */
 
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
 /*
  * Serial console configuration
  */
@@ -77,18 +56,13 @@
 /*
  * Supported commands
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -298,14 +272,12 @@
 /*#define CONFIG_SHOW_ACTIVITY*/
 #define CONFIG_NET_RETRY_COUNT         10      /* # of retries          */
 
-#define CONFIG_ETHADDR   00:00:7a:cc:00:13
 #define CONFIG_PHY_ADDR         0x00
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
@@ -320,8 +292,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */
@@ -335,43 +305,38 @@
 
 /***** Gaisler GRLIB IP-Cores Config ********/
 
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
 #define CONFIG_SYS_GRLIB_SDRAM    0
 
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
 #else
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82205260
 #endif
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x0809a000
 
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
 #else
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82205260
 #endif
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x0809a000
 
 /* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
 
 /* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
-
-/* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
 
 /* default kernel command line */
 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"