flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / gr_xc3s_1500.h

diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index 428b5324eefa319a225643d11ab628e597d091a3..20eeab33d9c9330f904d2a1b4b555e6157a6e74f 100644 (file)
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -23,9 +23,6 @@
 /* CPU / AMBA BUS configuration */
 #define CONFIG_SYS_CLK_FREQ    40000000        /* 40MHz */
 
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
 /*
  * Serial console configuration
  */
@@ -33,22 +30,17 @@
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * Supported commands
  */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -135,7 +127,6 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-/*#define CONFIG_SYS_NO_FLASH          1*/
 #define CONFIG_SYS_FLASH_BASE          0x00000000
 #define CONFIG_SYS_FLASH_SIZE          0x00800000
 
@@ -252,26 +243,28 @@
 
 #define CONFIG_SYS_GRLIB_SDRAM    0
 
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
 
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
 
 /* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
 
 /* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
 
 /* default kernel command line */
 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"