Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / grasshopper.h

diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index c288b39f2d569d28a1eceb648341b8acae474d21..83b78907f26d4b3e88c34014f8a79b7f383fe046 100644 (file)
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -11,16 +11,9 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32
 #define CONFIG_AT32AP
 #define CONFIG_AT32AP7000
 
-/*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ                  1000
-
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
@@ -69,27 +62,13 @@
 #define CONFIG_USART_BASE              ATMEL_BASE_USART1
 #define CONFIG_USART_ID                        1
 
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /* User serviceable stuff */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_STACKSIZE               (2048)
-
-#define CONFIG_BAUDRATE                        115200
-
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY               1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT         "Press SPACE to abort autoboot in %d" \
-                                       " seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR      "d"
-#define CONFIG_AUTOBOOT_STOP_STR       " "
-
 /*
  * After booting the board for the first time, new ethernet addresses
  * should be generated and assigned to the environment variables
@@ -106,20 +85,9 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-/* remove unneeded commands */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-
 /* add useful commands */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 
@@ -158,14 +126,12 @@
                                         CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN          (256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN       (16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR           (EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN      (16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \