]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/grsim.h
flash: complete CONFIG_SYS_NO_FLASH move with renaming
[people/ms/u-boot.git] / include / configs / grsim.h
index 21b4f5e5d4ddd2fa6d51202cb72b9a11fb0ba328..18b8d3cbcbbe74ebf5351c296052d5e2c0d4e95d 100644 (file)
  *
  * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
  *
- * TSIM command
- *  tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
+ * TSIM command:
+ * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
  *
+ * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
+ * hard-coded to these values and need not be specified. (see below)
+ *
+ * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
  */
 
 #define CONFIG_GRSIM           0       /* ... not running on GRSIM */
@@ -30,9 +34,6 @@
 /* CPU / AMBA BUS configuration */
 #define CONFIG_SYS_CLK_FREQ    40000000        /* 40MHz */
 
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
 /*
  * Serial console configuration
  */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * Supported commands
  */
-#define CONFIG_CMD_AMBAPP      /* AMBA Plyg&Play information   */
-#define CONFIG_CMD_BDI         /* bdinfo                       */
-#define CONFIG_CMD_CONSOLE     /* coninfo                      */
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO                /* echo arguments               */
-#define CONFIG_CMD_FPGA                /* FPGA configuration Support   */
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST       /* Integer (and string) test    */
-#define CONFIG_CMD_LOADB       /* loadb                        */
-#define CONFIG_CMD_LOADS       /* loads                        */
-#define CONFIG_CMD_MISC                /* Misc functions like sleep etc */
-#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN         /* run command in env variable  */
-#define CONFIG_CMD_SETGETDCR   /* DCR support on 4xx           */
-#define CONFIG_CMD_SOURCE      /* "source" command support     */
-#define CONFIG_CMD_XIMG                /* Load part of Multi Image     */
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
        "echo"
 
 #undef CONFIG_BOOTARGS
-/*#define CONFIG_SYS_HUSH_PARSER 0*/
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-#define CONFIG_SYS_NO_FLASH            1
 #define CONFIG_SYS_FLASH_BASE          0x00000000
 #define CONFIG_SYS_FLASH_SIZE          0x00800000
 #define CONFIG_ENV_SIZE                0x8000
 /*
  * Memory map
  */
-#define CONFIG_SYS_SDRAM_BASE          0x40000000
-#define CONFIG_SYS_SDRAM_SIZE          0x02000000
-#define CONFIG_SYS_SDRAM_END           (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE          0x60000000
+#define CONFIG_SYS_SDRAM_SIZE          0x02000000 /* 32MiB SDRAM */
+#define CONFIG_SYS_SDRAM_END           (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
 
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_SRAM_BASE           0x40000000
+#define CONFIG_SYS_SRAM_SIZE           0x00400000 /* 4MiB SRAM */
+#define CONFIG_SYS_SRAM_END            (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
 
 /* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
+#define CONFIG_SYS_RAM_BASE            CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE            CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END             CONFIG_SYS_SDRAM_END
 
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
 
 /* make un relocated address from relocated address */
 #define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
 
+#ifdef CONFIG_CMD_NET
 /*
  * Ethernet configuration
  */
 /* #define CONFIG_GRETH_10MBIT 1 */
 #define CONFIG_PHY_ADDR                0x00
 
+#endif /* CONFIG_CMD_NET */
+
 /*
  * Miscellaneous configurable options
  */
 
 /***** Gaisler GRLIB IP-Cores Config ********/
 
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
 #define CONFIG_SYS_GRLIB_SDRAM     0
+
 #define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
+
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
+/* LEON2 MCTRL configuration */
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
 #if CONFIG_GRSIM
 /* GRSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
 #else
 /* TSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x00001820
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x81805220
 #endif
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
 
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
 
 /* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
 
 /* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
 
 /* default kernel command line */
 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
 
-#define CONFIG_IDENT_STRING "Gaisler GRSIM"
+/* TSIM command:
+ * $ ./tsim-leon3 -mmu -cas
+ *
+ *  This TSIM evaluation version will expire 2015-04-02
+ *
+ *
+ *  TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
+ *
+ *  Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
+ *  This software may only be used with a valid license.
+ *  For latest updates, go to http://www.gaisler.com/
+ *  Comments or bug-reports to support@gaisler.com
+ *
+ * serial port A on stdin/stdout
+ * allocated 4096 K SRAM memory, in 1 bank
+ * allocated 32 M SDRAM memory, in 1 bank
+ * allocated 2048 K ROM memory
+ * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
+ * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
+ * tsim> leon
+ * 0x80000000   Memory configuration register 1   0x000002ff
+ * 0x80000004   Memory configuration register 2   0x81805220
+ * 0x80000008   Memory configuration register 3   0x00000000
+ */
 
 #endif                         /* __CONFIG_H */