spi: Migrate CONFIG_MXC_SPI to Kconfig

[people/ms/u-boot.git] / include / configs / gw_ventana.h

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 5edd8adca8a3952a4e63df532a542c41c2062a25..4845c9fce52fb8b0beea1bd7374a7c4589a12f75 100644 (file)
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -54,7 +54,6 @@
 
 /* SPI */
 #ifdef CONFIG_CMD_SF
-  #define CONFIG_MXC_SPI
   #define CONFIG_SPI_FLASH_MTD
   #define CONFIG_SPI_FLASH_BAR
   #define CONFIG_SF_DEFAULT_BUS              0
@@ -67,16 +66,12 @@
 #elif defined(CONFIG_SPL_NAND_SUPPORT)
 /* Enable NAND support */
 #ifdef CONFIG_CMD_NAND
-  #define CONFIG_NAND_MXS
   #define CONFIG_SYS_MAX_NAND_DEVICE   1
   #define CONFIG_SYS_NAND_BASE         0x40000000
   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
   #define CONFIG_SYS_NAND_ONFI_DETECTION
 
   /* DMA stuff, needed for GPMI/MXS NAND support */
-  #define CONFIG_APBH_DMA
-  #define CONFIG_APBH_DMA_BURST
-  #define CONFIG_APBH_DMA_BURST8
 #endif
 
 #endif /* CONFIG_SPI_FLASH */
@@ -102,12 +97,10 @@
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
-  #define CONFIG_DWC_AHSATA
   #define CONFIG_SYS_SATA_MAX_DEVICE   1
   #define CONFIG_DWC_AHSATA_PORT_ID    0
   #define CONFIG_DWC_AHSATA_BASE_ADDR  SATA_ARB_BASE_ADDR
   #define CONFIG_LBA48
-  #define CONFIG_LIBATA
 #endif
 
 /*
@@ -141,25 +134,16 @@
 #define CONFIG_ARP_TIMEOUT       200UL
 
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS      0
 #define CONFIG_USBD_HS
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
 
-/* USB Mass Storage Gadget */
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
 /* Framebuffer and LCD */
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK          260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_VIDEO_BMP_LOGO
@@ -192,14 +176,6 @@
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_SPI_FLASH
-#define MTDIDS_DEFAULT    "nor0=nor"
-#define MTDPARTS_DEFAULT  \
-       "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
-#else
-#define MTDIDS_DEFAULT    "nand0=nand"
-#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-#endif
 
 /* Persistent Environment Config */
 #if defined(CONFIG_ENV_IS_IN_MMC)
@@ -237,8 +213,8 @@
        "hwconfig=_UNKNOWN_\0" \
        "video=\0" \
        \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
        "disk=0\0" \
        "part=1\0" \
        \