/* SPL */
#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
/* Falcon Mode */
#define CONFIG_CMD_SPL
-#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
+#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
#define CONFIG_DM_THERMAL
#endif
-/* GPIO */
-#define CONFIG_MXC_GPIO
-
/* Thermal */
#define CONFIG_IMX_THERMAL
#ifdef CONFIG_SPI_FLASH
/* SPI */
-#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SPI_FLASH_MTD
#else
/* Enable NAND support */
-#define CONFIG_CMD_TIME
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
#endif /* CONFIG_SPI_FLASH */
/* I2C Configs */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
*/
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
#define CONFIG_CMD_GSC
#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
-#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
/* Ethernet support */
#define CONFIG_ARP_TIMEOUT 200UL
/* USB Configs */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
/* USB Mass Storage Gadget */
-#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
-/* Netchip IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
/* Framebuffer and LCD */
-#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
-#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
+#define CONFIG_PREBOOT
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Environment */
#define CONFIG_IPADDR 192.168.1.1
#define CONFIG_SERVERIP 192.168.1.146
-#define HWCONFIG_DEFAULT \
- "hwconfig=rs232;" \
- "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "pcidisable=1\0" \
+ "splashpos=m,m\0" \
"usb_pgood_delay=2000\0" \
"console=ttymxc1\0" \
"bootdevs=usb mmc sata flash\0" \
- HWCONFIG_DEFAULT \
+ "hwconfig=_UNKNOWN_\0" \
"video=\0" \
\
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
+ "disk=0\0" \
+ "part=1\0" \
\
"fdt_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
"initrd_high=0xffffffff\0" \
+ "fixfdt=" \
+ "fdt addr ${fdt_addr}\0" \
"bootdir=boot\0" \
"loadfdt=" \
"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
+ "run fixfdt; " \
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
+ "run fixfdt; " \
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
+ "run fixfdt; " \
"fi\0" \
\
+ "fs=ext4\0" \
"script=6x_bootscript-ventana\0" \
"loadscript=" \
"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
- "source; " \
+ "source ${loadaddr}; " \
"fi\0" \
\
"uimage=uImage\0" \
- "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
+ "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
"mmc_boot=" \
- "setenv fsload 'ext2load mmc 0:1'; " \
- "mmc dev 0 && mmc rescan && " \
+ "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
+ "mmc dev ${disk} && mmc rescan && " \
"setenv dtype mmc; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mmcblk0p1 rootfstype=ext4 " \
+ "root=/dev/mmcblk0p1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi\0" \
\
"sata_boot=" \
- "setenv fsload 'ext2load sata 0:1'; sata init && " \
+ "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
+ "sata init && " \
"setenv dtype sata; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi; " \
"fi\0" \
"usb_boot=" \
- "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
+ "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
+ "usb start && usb dev ${disk} && " \
"setenv dtype usb; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
"root=${root} ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"ubifsumount; " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"if run ${btype}_boot; then; fi; " \
"done"
-/* Device Tree Support */
-#define CONFIG_FDT_FIXUP_PARTITIONS
-
#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / blobdiff