fs: Migrate ext4 to Kconfig

[people/ms/u-boot.git] / include / configs / hikey.h

diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 1a4381bfe2f8975465cdc245828420153b03995a..130c7694bf4abd7d7a4fb209b000a5513ec1f4b8 100644 (file)
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -21,22 +21,12 @@
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
-/* Cache Definitions */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_IDENT_STRING            "hikey"
-
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Physical Memory Map */
 
 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
 #define CONFIG_SYS_TEXT_BASE           0x35000000
 
-#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_NR_DRAM_BANKS           6
 #define PHYS_SDRAM_1                   0x00000000
 
 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
@@ -62,40 +52,21 @@
 
 /* Serial port PL010/PL011 through the device model */
 #define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
 
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MISC_INIT_R
 #endif
 
 #define CONFIG_HIKEY_GPIO
-#define CONFIG_CMD_GPIO
 
 /* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_DWMMC
-#define CONFIG_HIKEY_DWMMC
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_MMC
-
-#define CONFIG_FS_EXT4
 
 /* Command line configuration */
-#define CONFIG_MENU
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_ENV
 
 #define CONFIG_MTD_PARTITIONS
 
@@ -110,9 +81,6 @@
  * Defines where the kernel and FDT will be put in RAM
  */
 
-/* Assume we boot with root on the seventh partition of eMMC */
-#define CONFIG_BOOTARGS        "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 1) \
@@ -122,34 +90,20 @@
 #define CONFIG_EXTRA_ENV_SETTINGS      \
                                "kernel_name=Image\0"   \
                                "kernel_addr_r=0x00080000\0" \
-                               "fdt_name=hi6220-hikey.dtb\0" \
+                               "fdtfile=hi6220-hikey.dtb\0" \
                                "fdt_addr_r=0x02000000\0" \
                                "fdt_high=0xffffffffffffffff\0" \
                                "initrd_high=0xffffffffffffffff\0" \
                                BOOTENV
 
-
-/* Preserve enviroment on sd card */
-#define CONFIG_COMMAND_HISTORY
-
+/* Preserve environment on sd card */
 #define CONFIG_ENV_SIZE                        0x1000
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE               "mmc"
-#define FAT_ENV_DEVICE_AND_PART         "1:1"
-#define FAT_ENV_FILE                    "uboot.env"
-#define CONFIG_FAT_WRITE
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_SYS_NO_FLASH
-
 #endif /* __HIKEY_H */