]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/hikey.h
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
[people/ms/u-boot.git] / include / configs / hikey.h
index 899d62de2689070b593814e58b32103d5be75cf6..d603641204b509bf5d8a9f436c79651803fbcc9e 100644 (file)
 
 #define CONFIG_REMAKE_ELF
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 /* Physical Memory Map */
 
 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
-#define CONFIG_SYS_TEXT_BASE           0x35000000
 
 #define CONFIG_NR_DRAM_BANKS           6
 #define PHYS_SDRAM_1                   0x00000000
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + SZ_8M)
 
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE                        115200
-
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
 
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MISC_INIT_R
 #endif
 
 /* SD/MMC configuration */
 #define CONFIG_BOUNCE_BUFFER
 
-#define CONFIG_FS_EXT4
-
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 
 #define CONFIG_MTD_PARTITIONS
 
@@ -89,9 +75,6 @@
  * Defines where the kernel and FDT will be put in RAM
  */
 
-/* Assume we boot with root on the seventh partition of eMMC */
-#define CONFIG_BOOTARGS        "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 1) \
                                BOOTENV
 
 /* Preserve environment on sd card */
-#define CONFIG_COMMAND_HISTORY
-
 #define CONFIG_ENV_SIZE                        0x1000
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE               "mmc"
-#define FAT_ENV_DEVICE_AND_PART         "1:1"
-#define FAT_ENV_FILE                    "uboot.env"
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_SYS_NO_FLASH
-
 #endif /* __HIKEY_H */