mx53: Add Board support for GE PPD

[people/ms/u-boot.git] / include / configs / hrcon.h

diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index c5e6828e2be61174a87a18c817b0639e332ce290..95db26c971ece35e87085f350d02e5b5b7cb4f58 100644 (file)
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -20,26 +20,11 @@
 
 #define        CONFIG_SYS_TEXT_BASE    0xFE000000
 
-#ifdef CONFIG_HRCON_DH
-#define CONFIG_IDENT_STRING    " hrcon dh 0.01"
-#else
-#define CONFIG_IDENT_STRING    " hrcon 0.01"
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_FPGAD
-#define CONFIG_CMD_IOLOOP
 
 /*
  * System Clock Setup
@@ -229,8 +214,6 @@
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#else
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #define CONFIG_SYS_FLASH_BASE          0xFE000000 /* FLASH base address */
@@ -480,12 +463,9 @@ void fpga_control_clear(unsigned int bus, int pin);
 /* enable PCIE clock */
 #define CONFIG_SYS_SCCR_PCIEXP1CM      1
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
 
@@ -513,7 +493,6 @@ void fpga_control_clear(unsigned int bus, int pin);
  * Environment
  */
 #if 1
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
                                 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE   0x10000 /* 64K(one sector) for env */
@@ -521,7 +500,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
 #else
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                0x2000          /* 8KB */
 #endif
 
@@ -531,7 +509,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PCI
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
@@ -545,11 +522,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /*
@@ -615,8 +587,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */