Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / ids8313.h

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 6b6bbbd5c027a4e1e6d9f1cacb75ac6c06fa3c73..1769224c57365133d98ef68c3fee2a22686f91c4 100644 (file)
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -17,7 +17,6 @@
  */
 #define CONFIG_MPC831x
 #define CONFIG_MPC8313
-#define CONFIG_IDS8313
 
 #define CONFIG_FSL_ELBC
 
@@ -165,7 +164,6 @@
 #define CONFIG_TSEC2
 #define CONFIG_TSEC_ENET
 #define CONFIG_HARD_SPI
-#define CONFIG_HARD_I2C
 
 /*
  * NOR FLASH setup
@@ -287,7 +285,6 @@
  * SPI setup
  */
 #ifdef CONFIG_HARD_SPI
-#define CONFIG_MPC8XXX_SPI
 #define CONFIG_SYS_GPIO1_PRELIM
 #define CONFIG_SYS_GPIO1_DIR           0x00000001
 #define CONFIG_SYS_GPIO1_DAT           0x00000001
@@ -412,13 +409,6 @@
 /*
  * U-Boot environment setup
  */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_JFFS2
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
@@ -431,7 +421,6 @@
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE \
                                + CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SIZE                0x20000
@@ -445,7 +434,6 @@
 #define CONFIG_UBOOTPATH               "ids8313/u-boot.bin"
 #define CONFIG_FDTFILE                 "ids8313/ids8313.dtb"
 #define CONFIG_LOADADDR                0x400000
-#define CONFIG_CMD_ENV_FLAGS
 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
 
 /* Initial Memory map for Linux*/
@@ -454,11 +442,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
-                                        + sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x00001000
@@ -471,7 +455,6 @@
 #define CONFIG_PREBOOT                 "echo;" \
                                        "echo Type \\\"run nfsboot\\\" " \
                                        "to mount root filesystem over NFS;echo"
-#undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND             "run boot_cramfs"
 #undef CONFIG_SYS_LOADS_BAUD_CHANGE
 
@@ -479,14 +462,8 @@
 #define CONFIG_JFFS2_DEV               "0"
 
 /* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT         "nor0=ff800000.flash,nand0=e1000000.flash"
-#define MTDPARTS_DEFAULT       "mtdparts=ff800000.flash:7m(dum)," \
-                                       "768k(BOOT-BIN)," \
-                                       "128k(BOOT-ENV),128k(BOOT-REDENV);" \
-                                       "e1000000.flash:-(ubi)"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" __stringify(CONFIG_NETDEV) "\0"                       \
@@ -516,8 +493,8 @@
                        "${netmask}:${hostname}:${netdev}:off "         \
                        "console=${console},${baudrate} ${othbootargs}\0" \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
-       "mtdids=" MTDIDS_DEFAULT "\0"                                   \
-       "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
        "\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
@@ -529,21 +506,13 @@
        "bootm ${loadaddr} - ${fdtaddr}"
 
 /* UBI Support */
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_PARTITIONS
 
 /* bootcount support */
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_I2C
 #define CONFIG_BOOTCOUNT_ALEN  1
 #define CONFIG_SYS_BOOTCOUNT_ADDR      0x9
 
 #define CONFIG_IMAGE_FORMAT_LEGACY
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA1
-#define CONFIG_SHA256
 
 #endif /* __CONFIG_H */