Kconfig: Move CONFIG_FIT and related options to Kconfig

[people/ms/u-boot.git] / include / configs / ipek01.h

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d3821389fd5025f64cc12a42436216f7d5aabc31..ea9d8b059ae04f38703a450de7e17b2597d28e9b 100644 (file)
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -5,23 +5,7 @@
  * (C) Copyright 2009
  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,10 +16,10 @@
  */
 
 #define CONFIG_MPC5200
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPX5200         1       /* ... on MPX5200 board */
-#define CONFIG_MPC5200_DDR     1       /* ... use DDR RAM */
+#define CONFIG_MPX5200         1       /* MPX5200 board */
+#define CONFIG_MPC5200_DDR     1       /* use DDR RAM */
 #define CONFIG_IPEK01                  /* Motherboard is ipek01 */
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0xfc000000
 
@@ -98,7 +82,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
@@ -119,8 +102,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #ifdef CONFIG_VIDEO
 #define CONFIG_CMD_BMP         /* BMP support */
 #endif
@@ -189,9 +170,6 @@
 /*
  * Open firmware flat tree support
  */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)
@@ -266,8 +244,6 @@
 /* End of used area in DPRAM */
 #define CONFIG_SYS_INIT_RAM_SIZE               MPC5XXX_SRAM_SIZE
 
-/* size in bytes reserved for initial data */
-
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
                                         GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
@@ -297,7 +273,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 #else
@@ -316,7 +291,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000 /* default load address */
 
-#define CONFIG_SYS_HZ                  1000 /* decrementer freq: 1 ms ticks */
 #define CONFIG_LOOPW
 
 /*