Kconfig: Move CONFIG_FIT and related options to Kconfig

[people/ms/u-boot.git] / include / configs / km / km-powerpc.h

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index d6db8d79f1a51e6c3b79630d1a3f0b2571cabf8a..8293607c9cb3586beaa5c5cef27b07e73e22ef6a 100644 (file)
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -2,33 +2,29 @@
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_KEYMILE_POWERPC_H
 #define __CONFIG_KEYMILE_POWERPC_H
 
+/* Do boardspecific init for all boards */
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
+
 #define CONFIG_BOOTCOUNT_LIMIT
 
 #define CONFIG_CMD_DTT
 #define CONFIG_JFFS2_CMDLINE
 
+/* standard km ethernet_present for piggy */
+#define CONFIG_KM_COMMON_ETH_INIT
+
+/* EEprom support 24C08, 24C16, 24C64 */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3  /* 8 Byte write page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 #define CONFIG_ENV_SIZE                0x04000         /* Size of Environment */
 #define CONFIG_FLASH_CFI_MTD
 
@@ -38,6 +34,9 @@
 
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 
+/* Reserve 4 MB for malloc */
+#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
+
 /******************************************************************************
  * (PRAM usage)
  * ... -------------------------------------------------------
@@ -59,30 +58,27 @@
 #define CONFIG_KM_PHRAM                0x100000
 /* resereved pram area at the end of memroy [hex] */
 #define CONFIG_KM_RESERVED_PRAM        0x0
-/* enable protected RAM */
-#define CONFIG_PRAM            0
+/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
+ * is not valid yet, which is the case for when u-boot copies itself to RAM */
+#define CONFIG_PRAM            ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
 
-#define CONFIG_KM_CRAMFS_ADDR  0x800000
-#define CONFIG_KM_KERNEL_ADDR  0x400000        /* 3968Kbytes */
-#define CONFIG_KM_FDT_ADDR     0x7E0000        /* 128Kbytes */
+#define CONFIG_KM_CRAMFS_ADDR  0xC00000
+#define CONFIG_KM_KERNEL_ADDR  0x400000        /* 7680Kbytes */
+#define CONFIG_KM_FDT_ADDR     0xB80000        /* 512Kbytes */
+
+/* architecture specific default bootargs */
+#define CONFIG_KM_DEF_BOOT_ARGS_CPU            ""
 
 #define CONFIG_KM_DEF_ENV_CPU                                          \
-       "addbootcount=true\0"                                           \
-       "addmtdparts=true\0"                                            \
-       "boot=bootm ${actual_kernel_addr} - ${actual_fdt_addr}\0"       \
-       "cramfsloadfdt="                                                \
-               "cramfsload ${fdt_addr_r} "                             \
-               "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb && "           \
-               "setenv actual_fdt_addr ${fdt_addr_r}\0"                \
-       "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0"                     \
+       "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"           \
        "update="                                                       \
-               "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\
-               "erase " xstr(BOOTFLASH_START) "  +${filesize} && "     \
-               "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START)          \
+               "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
+               "erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\
+               "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START)     \
                "  ${filesize} && "                                     \
-               "protect on " xstr(BOOTFLASH_START) "  +${filesize}\0"  \
+               "protect on " __stringify(BOOTFLASH_START) "  +${filesize}\0"\
+       "set_fdthigh=true\0"                                            \
+       "checkfdt=true\0"                                               \
        ""
 
-#define CONFIG_KM_ARCH_DBG_FILE                "scripts/debug-ppc-env.txt"
-
 #endif /* __CONFIG_KEYMILE_POWERPC_H */