Kconfig: Move CONFIG_FIT and related options to Kconfig

[people/ms/u-boot.git] / include / configs / km / km83xx-common.h

diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 6b3a4cca30b81e6c25b98d73b0858d542878fd46..6a9d73982139e0d81fb7bfecb90a44408bf86b77 100644 (file)
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -8,6 +8,8 @@
 #ifndef __CONFIG_KM83XX_H
 #define __CONFIG_KM83XX_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 #include "km-powerpc.h"
@@ -84,7 +86,6 @@
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xE6000000 /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100 /* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
                                                GENERATED_GBL_DATA_SIZE)
 
@@ -143,7 +144,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -151,11 +151,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
 /*
  * QE UEC ethernet configuration
  */
@@ -183,10 +178,14 @@
 
 #ifndef CONFIG_SYS_RAMBOOT
 #define CONFIG_ENV_IS_IN_FLASH
+#ifndef CONFIG_ENV_ADDR
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
                                        CONFIG_SYS_MONITOR_LEN)
+#endif
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
+#ifndef CONFIG_ENV_OFFSET
 #define CONFIG_ENV_OFFSET      (CONFIG_SYS_MONITOR_LEN)
+#endif
 
 /* Address and size of Redundant Environment Sector    */
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
@@ -201,19 +200,30 @@
 #endif /* CFG_SYS_RAMBOOT */
 
 /* I2C */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED   200000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_OFFSET  0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_NUM_I2C_BUSES       4
+#define CONFIG_SYS_I2C_MAX_HOPS                1
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       200000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_I2C_OFFSET          0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      200000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_BUSES   {{0, {I2C_NULL_HOP} }, \
+               {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+               {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+               {1, {I2C_NULL_HOP} } }
+
+#define CONFIG_KM_IVM_BUS              2       /* I2C2 (Mux-Port 1)*/
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible) */
 #define CONFIG_DTT_LM75                /* ON Semi's LM75 */
 #define CONFIG_DTT_SENSORS     {0, 1, 2, 3}    /* Sensor addresses */
 #define CONFIG_SYS_DTT_MAX_TEMP        70
-#define CONFIG_SYS_DTT_LOW_TEMP        -30
 #define CONFIG_SYS_DTT_HYSTERESIS      3
-#define CONFIG_SYS_DTT_BUS_NUM         (CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM         1
 
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_KMETER1
@@ -309,10 +319,9 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        CONFIG_KM_DEF_ENV                                               \
        CONFIG_KM_DEF_ARCH                                              \
-       "EEprom_ivm=pca9547:70:9\0"                                     \
        "newenv="                                                       \
-               "prot off 0xF00C0000 +0x40000 && "                      \
-               "era 0xF00C0000 +0x40000\0"                             \
+               "prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && "  \
+               "era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0"         \
        "unlock=yes\0"                                                  \
        ""