configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / km / km_arm.h

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 5e0f483e4758f25f5ac26960626af2c9cf913afb..02e8a97f2fc407efc2c0c73cd70aa97e3ef4e6b4 100644 (file)
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -20,11 +20,6 @@
 #ifndef _CONFIG_KM_ARM_H
 #define _CONFIG_KM_ARM_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* We got removed from Linux mach-types.h */
-#define MACH_TYPE_KM_KIRKWOOD          2255
-
 /*
  * High Level Configuration Options (easy to change)
  */
@@ -42,7 +37,6 @@
 #include "keymile-common.h"
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
 
 /* SPI NOR Flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED                8100000
@@ -83,18 +77,20 @@
        "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0"           \
        CONFIG_KM_UPDATE_UBOOT                                          \
        "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
+       "checkfdt="                                                     \
+               "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
+               "then true; else setenv cramfsloadfdt true; "           \
+               "setenv boot bootm ${load_addr_r}; "                    \
+               "echo No FDT found, booting with the kernel "           \
+               "appended one; fi\0"                                    \
        ""
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
 #define CONFIG_MISC_INIT_R
 
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-
 /*
  * NS16550 Configuration
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_TCLK
@@ -119,16 +115,6 @@
 #define CONFIG_INITRD_TAG              /* enable INITRD tag */
 #define CONFIG_SETUP_MEMORY_TAGS       /* enable memory tag */
 
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_MTDPARTS
-
-/*
- * Without NOR FLASH we need this
- */
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * NAND Flash configuration
  */
@@ -146,10 +132,7 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_CONSOLE_INFO_QUIET      /* some code reduction */
 #define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT          /* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO         /* Display cpu info */
 #define CONFIG_NR_DRAM_BANKS   4
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
 
@@ -158,7 +141,6 @@
  */
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
 #define CONFIG_MII             /* expose smi ove miiphy interface */
-#define CONFIG_CMD_MII         /* to debug mdio phy config */
 #define CONFIG_MVGBE           /* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
 #define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
@@ -166,11 +148,6 @@
 #define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
 
-/*
- * UBI related stuff
- */
-#define CONFIG_SYS_USE_UBI
-
 /*
  * I2C related stuff
  */
@@ -216,7 +193,6 @@ int get_scl(void);
 #define        CONFIG_SYS_I2C_SOFT_SPEED       100000
 
 /* EEprom support 24C128, 24C256 valid for environment eeprom */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6 /* 64 Byte write page */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
@@ -242,14 +218,13 @@ int get_scl(void);
 #define CONFIG_SYS_EEPROM_WREN
 #define CONFIG_ENV_OFFSET              0x0 /* no bracets! */
 #define CONFIG_ENV_SIZE                        (0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS      KM_ENV_BUS
+#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 #define CONFIG_ENV_OFFSET_REDUND       0x2000 /* no bracets! */
 #define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
 #endif
 
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
-#define CONFIG_SPI_FLASH_STMICRO
 
 /* SPI bus claim MPP configuration */
 #define CONFIG_SYS_KW_SPI_MPP  0x0
@@ -302,7 +277,7 @@ int get_scl(void);
        "arch=arm\0"                                                    \
        ""
 
-#if defined(CONFIG_SYS_NO_FLASH)
+#if !defined(CONFIG_MTD_NOR_FLASH)
 #undef CONFIG_FLASH_CFI_MTD
 #undef CONFIG_JFFS2_CMDLINE
 #endif
@@ -310,7 +285,6 @@ int get_scl(void);
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 /* Do early setups now in board_init_f() */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * resereved pram area at the end of memroy [hex]
@@ -326,9 +300,7 @@ int get_scl(void);
 #define CONFIG_POST    (CONFIG_SYS_POST_MEM_REGIONS)
 #define CONFIG_POST_SKIP_ENV_FLAGS
 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
-#define CONFIG_CMD_DIAG
 
 /* we do the whole PCIe FPGA config stuff here */
-#define        CONFIG_BOARD_LATE_INIT
 
 #endif /* _CONFIG_KM_ARM_H */