Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig

[people/ms/u-boot.git] / include / configs / km / kmp204x-common.h

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index affcb4886849d38e1dc1e7212669a016ef1c802c..7f735e0ac67ec2105d125262c3cbeaeb09915454 100644 (file)
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -8,8 +8,6 @@
 #ifndef _CONFIG_KMP204X_H
 #define _CONFIG_KMP204X_H
 
-#define CONFIG_SYS_TEXT_BASE   0xfff40000
-
 #define CONFIG_KM_DEF_NETDEV   "netdev=eth0\0"
 
 /* an additionnal option is required for UBI as subpage access is
@@ -29,16 +27,12 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_FSL_CORENET             /* Freescale CoreNet platform */
 #define CONFIG_MP                      /* support multiple processors */
 
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
+#define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_PCIE1                   /* PCIE controller 1 */
 #define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
@@ -48,7 +42,6 @@
 
 /* Environment in SPI Flash */
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS              0
 #define CONFIG_ENV_SPI_CS               0
 #define CONFIG_ENV_SPI_MAX_HZ           20000000
@@ -104,7 +97,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SPD_BUS_NUM 0
@@ -158,11 +150,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
-#define CONFIG_BCH
-
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                               | BR_PS_8               /* Port Size = 8 bit */ \
@@ -200,10 +189,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
 
 /* bootcounter in QRIO */
-#define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_ADDR      (CONFIG_SYS_QRIO_BASE + 0x20)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
 #define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
@@ -306,7 +293,6 @@ int get_scl(void);
 #define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 /* Qman/Bman */
-#define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
 #define CONFIG_SYS_BMAN_NUM_PORTALS    10
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #define CONFIG_SYS_BMAN_MEM_PHYS       0xff4000000ull
@@ -350,14 +336,11 @@ int get_scl(void);
 #define CONFIG_PCI_INDIRECT_BRIDGE
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 
 /* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */
 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11
 #define CONFIG_SYS_TBIPA_VALUE 8
-#define CONFIG_PHYLIB          /* recommended PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC5"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 
 /*
  * Environment
@@ -376,11 +359,8 @@ int get_scl(void);
 /*
  * additionnal command line configuration.
  */
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ERRATA
 
 /* we don't need flash support */
-#define CONFIG_SYS_NO_FLASH
 #undef CONFIG_FLASH_CFI_MTD
 #undef CONFIG_JFFS2_CMDLINE
 
@@ -407,16 +387,6 @@ int get_scl(void);
 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 #endif
 
-#ifndef MTDIDS_DEFAULT
-# define MTDIDS_DEFAULT                "nand0=fsl_elbc_nand"
-#endif /* MTDIDS_DEFAULT */
-
-#ifndef MTDPARTS_DEFAULT
-# define MTDPARTS_DEFAULT      "mtdparts="                     \
-       "fsl_elbc_nand:"                                                \
-               "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
-#endif /* MTDPARTS_DEFAULT */
-
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU            ""