drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / km / kmp204x-common.h

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index efd96352eca45f93f3ba951a319b8a6c9e4106b3..c1c23bf3ca70674f03198ecb6ff772b910506bb2 100644 (file)
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -8,10 +8,9 @@
 #ifndef _CONFIG_KMP204X_H
 #define _CONFIG_KMP204X_H
 
-#define CONFIG_PHYS_64BIT
 #define CONFIG_PPC_P2041
 
-#define CONFIG_SYS_TEXT_BASE   0xfff80000
+#define CONFIG_SYS_TEXT_BASE   0xfff40000
 
 #define CONFIG_KM_DEF_NETDEV   "netdev=eth0\0"
 
@@ -42,9 +41,8 @@
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
@@ -164,7 +162,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
@@ -235,7 +232,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
 
 /* Serial Port - controlled on board with jumper J8
@@ -243,7 +240,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -255,18 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_KM_CONSOLE_TTY  "ttyS0"
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 
 #define CONFIG_SYS_I2C
@@ -296,12 +280,7 @@ int get_scl(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR   /* 4 byte-addressing */
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         20000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -336,10 +315,26 @@ int get_scl(void);
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #define CONFIG_SYS_BMAN_MEM_PHYS       0xff4000000ull
 #define CONFIG_SYS_BMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
+                                       CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 #define CONFIG_SYS_QMAN_NUM_PORTALS    10
 #define CONFIG_SYS_QMAN_MEM_BASE       0xf4200000
 #define CONFIG_SYS_QMAN_MEM_PHYS       0xff4200000ull
 #define CONFIG_SYS_QMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
+                                       CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
@@ -358,7 +353,6 @@ int get_scl(void);
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-#define CONFIG_E1000
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -376,17 +370,22 @@ int get_scl(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
+/*
+ * Hardware Watchdog
+ */
+#define CONFIG_WATCHDOG                        /* enable CPU watchdog */
+#define CONFIG_WATCHDOG_PRESC 34       /* wdog prescaler 2^(64-34) (~10min) */
+#define CONFIG_WATCHDOG_RC WRC_CHIP    /* reset chip on watchdog event */
+
+
 /*
  * additionnal command line configuration.
  */
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_ERRATA
 
 /* we don't need flash support */
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
 #undef CONFIG_FLASH_CFI_MTD
 #undef CONFIG_JFFS2_CMDLINE
 
@@ -403,6 +402,7 @@ int get_scl(void);
 #endif
 
 #define __USB_PHY_TYPE utmi
+#define CONFIG_USB_EHCI_FSL
 
 /*
  * Environment Configuration
@@ -437,6 +437,7 @@ int get_scl(void);
                "sf probe 0;sf erase 0 +${filesize};"                   \
                "sf write ${load_addr_r} 0 ${filesize};\0"              \
        "set_fdthigh=true\0"                                            \
+       "checkfdt=true\0"                                               \
        ""
 
 #define CONFIG_HW_ENV_SETTINGS                                         \