flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / ls1012a_common.h

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index ccd94ec952c239d998aaf65c5f443d4e11642a99..e556c925fe4d72888e64672bf2427f6e11fcf533 100644 (file)
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -8,14 +8,9 @@
 #define __LS1012A_COMMON_H
 
 #define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_FSL_LSCH2
-#define CONFIG_LS1012A
 #define CONFIG_GICV2
 
-#define        CONFIG_SYS_HAS_SERDES
-
 #include <asm/arch/config.h>
-#define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
@@ -23,12 +18,9 @@
 
 #define CONFIG_SYS_TEXT_BASE           0x40100000
 
-#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            125000000
+#define CONFIG_SYS_CLK_FREQ            125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F      1
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -36,6 +28,7 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              CONFIG_SYS_CLK_FREQ/4   /* 25MHz */
@@ -86,7 +79,7 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -95,37 +88,27 @@
 #define CONFIG_CMD_ENV
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-#define CONFIG_DISPLAY_CPUINFO
-
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "initrd_high=0xffffffff\0"              \
        "verify=no\0"                           \
-       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x80100000\0"                 \
        "kernel_addr=0x100000\0"                \
-       "ramdisk_addr=0x800000\0"               \
-       "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "kernel_start=0xa00000\0"               \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
-       "console=ttyAMA0,38400n8\0"
 
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500"
+                               "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 #define CONFIG_BOOTCOMMAND             "sf probe 0:0; sf read $kernel_load "\
                                        "$kernel_start $kernel_size && "\
                                        "bootm $kernel_load"
-#define CONFIG_BOOTDELAY               10
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */