Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 4f5053881ee82dbc62dc659da10aee117b01151d..2c85e5d638c9219a423785275ce4dc9ba814fe6a 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -11,6 +11,7 @@
 
 #define CONFIG_ARMV7_PSCI
 
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -41,7 +42,7 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 #define CONFIG_QIXIS_I2C_ACCESS
@@ -55,7 +56,13 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
+#endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -68,7 +75,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x400
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x600
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -81,11 +88,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_MONITOR_LEN         0x80000
+#define CONFIG_SYS_MONITOR_LEN         0xc0000
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE           0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_NO_FLASH
 #endif
 
@@ -161,7 +171,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * IFC Definitions
  */
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE          0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
@@ -370,13 +380,13 @@ unsigned long get_board_ddr_clk(void);
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
+#endif
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #endif
 
@@ -411,16 +421,13 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DOS_PARTITION
 
 /* SPI */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 /* QSPI */
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
-#define CONFIG_SPI_FLASH_SPANSION
 
 /* DSPI */
-#define CONFIG_FSL_DSPI
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
@@ -559,10 +566,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#undef CONFIG_CMD_IMLS
+#endif
+
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ          12500000
 
@@ -573,19 +584,19 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTDELAY               3
 
-#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
        "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-       "fdt_high=0xcfffffff\0"         \
-       "initrd_high=0xcfffffff\0"      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-       "fdt_high=0xcfffffff\0"         \
-       "initrd_high=0xcfffffff\0"      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
 
@@ -655,19 +666,19 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
+#endif
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
 #include <asm/fsl_secure_boot.h>
-#endif
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20) /* Increase max gunzip size */
 
 #endif